《AS 1110.1-2016 ISO metric hexagon bolts and screws - Product grades A and B - Bolts》.pdf
- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
AS 1110.1—2000
ISO 4014:1999
A
S
1
1
1
0
.
1
Australian Standard™
ISO metric hexagon bolts and screws—
Product grades A and B
Part 1: Bolts
[ISO title: Hexagon head bolts—Product grades A and B]
This Australian Standard was prepared by Committee ME/29, Fasteners. It was
approved on behalf of the Council of Standards Australia on 21 April 2000 and
published on 23 June 2000.
The following interests are represented on Committee ME/29:
Australian Building Codes Board
Australian Chamber of Commerce and Industry
Australian Industry Group
Bureau of Steel Manufacturers of Australia
Electricity Supply Association of Australia
Federal Chamber of Automotive Industries
Institute of Materials Engineering Australasia
Metal Building Products Manufacturers Association
Keeping Standards up-to-date
Standards are living documents which reflect progress in science, technology and
systems. To maintain their currency, all Standards are periodically reviewed, and
new editions are published. Between editions, amendments may be issued.
Standards may also be withdrawn. It is important that readers assure themselves
they are using a current Standard, which should include any amendments which
may have been published since the Standard was purchased.
Detailed information about Standards can be found by visiting the Standards
Australia web sit
文档评论(0)