IEC60231普通照明用LED模块安全规范(中英版)精品.pdf

IEC 62031 Edition 1.0 2008-01 STANDARD NORME INTERNATIONALE 62031 Ed. 1/CDV © IEC – 2 – INTRODUCTION Based on the ever increasing performance and efficiency of Light Emitting Diodes (LEDs), all conventional light sources will gradually become challenged by Solid State Lighting solutions in the decades to come. The unit, in which the LEDs are assembled, is called LED module and is regarded as the light source which is used in the field. Some lighting features of LED/LED modules, owing to their nature as semiconductors, are quite different from lighting components and -systems, as we know them today, e.g. switching behavior, life time, lumen spot, size. This change in character will impact the solutions that will be brought to the market. LED modules, in different stages of integration with respect to the luminaries and the control gear, will form the basis of this new way of lighting. With regard to the speed of development, the standard has to be kept open in such a way that these developments are easy to implement, always safeguarding the required level of electrical and optical safety. This standard contains provisions for LED-modules with integral and external control gear. For the safety of the latter, reference is made to IEC 61347-2-13 (currently in preparation). 62031 Ed. 1/CDV © IEC – 4 – FOREWORD 5 1 Scope7 2 Normative references 7 3 Definitions 8 4 General requirements 9 5 General test requirements 9 6 Classification10 7 Marking 10 8 Terminals 11 9 Provisions for protective earthling 11 10 Protection against accidental conta