毕业论文：基于nRF2401模块的无线温度监测系统设计.doc

成都理工大学工程技术学院毕业论文 PAGE  -  PAGE 46 - 毕业论文 基于nRF24L01模块的无线通信系统设计 基于nRF24L01模块的无线通信系统设计 摘要 温度是一个非常重要的参数。在工业、医疗、军事和生活等许多地方，都需要用到测温装置来检测温度。传统直接布线测量不满足要求，特别是在某些环境恶劣的工业环境和户外环境，通过直接布线测量不现实。因此采用无线传输温度检测尤为必要。 目前有些设计能够实现无线温度采集，但价格过高是其最大的缺点。在实际温度控制过程中既要求系统具有稳定性、实时性又需要降低功耗。因此设计一种低功耗的无线温度检测系统很有意义。本文提出一种采用单片机AT89S52控制DS18B20实现的无线温度测量系统。通过简单的无线通信协议，实现可靠性与功耗平衡，该系统能实现对温度的检测，能够同时进行温度检测，??可以实现远程控制的无线温度检测系统。低功耗、实时性的无线温度检测是该设计的最大特点。无线传输采用nRF24L01模块传输。 该系统结构简单，可靠，功耗较低，成本低，是一种无线传感器的解决方案。 关键字：单片机 AT89S52 无线传输 nRF24l01 DS18B20 Abstract Temperature is a very important parameters. In the industrial, medical and military and life and many other place, it needs to use the temperature measurement device to detect temperature. The traditional direct measurement wiring does not meet the requirements, especially in some environmental bad industrial environment and outdoor environment, through the direct wiring measurement is not practical. So using wireless transmission temperature testing is necessary. At present some design can realize the wireless temperature gathering, but the price is too high, its biggest weakness. In the actual temperature control process requires both system has stability, real-time and the need to reduce power consumption. So the design of a kind of low power consumption wireless temperature detection system is very meaningful. This paper presents a USES the monolithic integrated circuit AT89S52 control DS18B20 of the realization of the wireless temperature measuring system. Through the simple wireless communication protocol, realize the reliability and power balance, the system can realize to the temperature detection, can simultaneously determine the temperature, can be realized the wireless remote control temperature detection system. Low power consumption, real-time wireless temperature detection is the biggest characteristic of the design. Wireless transmission using nRF24L01 module transmission. The system structure is simple, reliable, low power consumption