毕业论文：基于嵌入式Linux的枪支管理软件平台设计（终稿）.doc

本科毕业设计论文 题目：基于嵌入式Linux的枪支管理软件平台设计 作者姓名 XXX 指导教师 XX 教授 专业班级 XXXX 学 院 信息工程学院 提交日期 2011年6月4日  浙江工业大学本科毕业设计论文 基于嵌入式Linux的枪支管理软件平台设计 作者姓名：XX 指导教师：XX教授 浙江工业大学信息工程学院 2011年6月  Dissertation Submitted to Zhejiang University of Technology for the Degree of Bachelor Design of Software Platform for the Control of Guns Based on Embedded Linux Student: XX Advisor: Prof. XX College of Information Engineering Zhejiang University of Technology June 2011 基于嵌入式Linux的枪支管理软件平台设计 摘 要[1] 。基于嵌入式Linux的枪支管理系统设计可设计出一种系统智能化程度高、安全性能强、系统扩展性能好、应用快速的枪支安全管理装置。 本文从客户提出的枪支管理系统II型的实际需求出发，研究了基于嵌入式Linux的枪支管理软件平台的设计和实现。系统采用AT91SAM9261芯片，linux-2.6内核，Qt/Embedded运行环境进行开发设计，完成开发环境的搭建，实现RFID模块和指纹模块等的功能设计，运用Qt实现测试软件界面的设计，完成系统调试。 本文设计实现的枪支管理软件平台具有较高的可操作性和稳定性，实现了RFID模块的正常读取和记录并显示测试结果，以及指纹模块的正确采集和比对并保存显示测试结果，另外还有键盘模块、LCD模块等的测试功能。 关键词：Linux，RFID，指纹识别，Qt/Embedded Design of Software Platform for the Control of Guns Based on Embedded Linux ABSTRACT The system for the control of guns is mainly used for?the centralized?security control?of gun, thereby reducing the threats?to social stability because of the?illegal use of?gun. The design of system for the control of guns based on embedded linux can design a gun’s safety?device which has high degree of intelligence and strong?safety performance and good system scalability and rapid applications. This article research the design and implementation of software platform for the control of guns based on embedded linux,according to the actual demand of type II system for control of gun which is proposed by customers.System use AT91SAM9261 chip and kernel of linux-2.6? and operating environment of Qt/Embedded to develop and design, complete the building of?development environment,use Qt to implement the design of interface?of test software, Complete the debugging. The software platform for the control of guns designed by this article has high?maneuverability?and stability.This article impl