基于_51单片机和DS18B20的_数字温度设计.doc

基于51单片机的数字温度计设计 别重复上传啊混蛋~下载后请删除和修改首页 摘 要 随着科技的不断发展，电子设备的应用已经取得了非凡的成就。即使是高度集成化的今天，单片机技术依旧在我们的日常生活中占据着重要的地位。温度是日常生活、工业、医学、环境保护、化工、石油等领域最常用到的一个物理量。测量温度的基本方法是使用温度计直接读取温度。最常见到得测量温度的工具是各种各样的温度计。它们常常以刻度的形式表示温度的高低，人们必须通过读取刻度值的多少来测量温度。利用单片机和温度传感器构成的电子式智能温度计就可以直接测量温度，得到温度的数字值，既简单方便，有直观准确。本文讲叙了一种基于51系列单片机的数字温度计的设计过程与仿真结果。通过Proteus画图以及Keil编程，成功的仿真出了能够实时测量温度并显示温度的数字温度计，另外还能够通过外接的键盘设置一个基准值，若温度高于基准值则会报警并且发出控制动作。 关键词：单片机，温度计，仿真，AT89C52，DS18B20 Abstract With the continuous development of science and technology，the application of electronic equipment has made remarkable achievements．Even the highly integrated single-chip technology today，still in our daily life plays an important role in．Temperature is the daily life， industry， medicine， environmental protection，chemical industry，petroleum and other areas of the most commonly used of a physical quantity．Temperature measurement is the basic method used to directly read temperature thermometer．The most common to measuring the temperature of the tool is various thermometer．They often graduated form high and low temperature，people must read through the scale value number to measure temperature．Using single chip computer and a temperature sensor．The electronic type intelligent thermometer can measure temperature，the temperature of the digital values，are simple and convenient，is intuitive and accurate．This article tells of a microcontroller based on the Series 51 digital thermometers design process and simulation results．Through the Proteus drawing and keil programming，a successful simulation of a real-time temperature measurement and display the temperature of the digital thermometer，also can pass through an external keyboard to set a baseline value，if the temperature is higher than the reference value can alarm and send out the feedback action． Keywords：Single-chip Microcomputer，Thermometer，simulation，AT89C52，DS18B20 目 录 摘 要 I Abstract II 1 绪言 1．1 课题背景 1 1．2 课题研究的目的和意义 1 1．3 国内外研究现状 2 2 系统设计方案的研究 2．1 系统的控制特点与性能要求 4 2．2 系统的实现原理 4 2．