IEC61400-1 风力发电机设计要求 中文版.pdf

风力机 第一部分：设计要求 1 范围 为保证风力机的工程完整性，IEC61400 的这个部分详细说明了基本设计要求。其目的 是制定一个恰当的保护等级，以防止机组在计划寿命期内受到损坏。 本标准设计涉及到风力机的各子系统，如控制和保护机构，内部电气系统，机械系统及 支撑结构。 本标准适用于各种大小的风力机。对于小型风力机 IEC61400-2 可能适用。 本标准应与第二部分提到的 IEC 和 ISO 标准结合使用。 2 引用标准 下列标准所包含的条文，通过在本标准中引用而成为本标准的条文。凡是注日期的引用 文件，只有被引用的版本适合本标准。凡是不注日期的引用文件，其必威体育精装版版本（包括任何的 修订）适用于本标准。 IEC 60204-1:1997, Safety of machinery – Electrical equipment of machines – Part 1: General requirements IEC 60204-11:2000, Safety of machinery – Electrical equipment of machines – Part 11:Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and notexceeding 36 kV IEC 60364 (all parts), Electrical installations of buildings IEC 60721-2-1:1982, Classification of environmental conditions – Part 2: Environmental conditions appearing in nature. Temperature and humidity IEC 61000-6-1:1997, Electromagnetic compatibility (EMC) – Part 6: Generic standards –Section 1: Immunity for residential, commercial and light-industrial environments IEC 61000-6-2:1999, Electromagnetic compatibility (EMC) – Part 6: Generic standards –Section 2: Immunity for industrial environments 15 IEC 61000-6-4:1997, Electromagnetic compatibility (EMC) – Part 6: Generic standards –Section 4: Emission standard for industrial environments IEC 61024-1:1990, Protection of structures against lightning – Part 1: General principles IEC 61312-1:1995, Protection against lightning electromagnetic impulse – Part 1: General principle IEC 61400-21:2001, Wind turbine generator systems – Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines IEC 61400-24: 2002, Wind turbine generator systems – Part