帕萨特培训--车载控制单元.ppt

* Fitting location装配位置 The control unit for the on-board network is on the left under the dash panel insert. It forms a construction unit with the relay holder.在仪表左侧下方，用来构成继电器支架。 Versions种类 Two versions of the control unit for the on-board network are available有两种- High version for vehicles with fog lights and/or Bi-xenon light and personalization高档车辆氙灯和雾灯- Medium version for all other vehicles一般的应用在其他所有车辆 Fog lights can only be retro-fitted, if the medium version of the on-board network control unit is also replaced by the high version! 仅雾灯适合，同样代替高档的。Tasks任务 The control unit for the on-board network switches and controls the following functions 转换和控制下面功能: - Exterior lighting control: with light bulb monitoring: if a light bulb is defective灯光控制：如果灯光有缺陷，进行警报,  it is indicated by the corresponding control lamp or displayed as a text message in the dash panel insert通过相应控制灯显示或通过仪表显示器显示.- Comfort lighting: coming home leaving home dimmable instrument lighting, background lighting舒适照明,回家离家功能- Windscreen wiper: transmission of CAN data bus signals from the on-board network control unit to the  wiper motor雨刷控制：从车载控制单元发送的信息，通过CAN（LIN)传输到雨刷电机 Rear window wiper: the rear wiper is activated in reverse gear后风窗雨刷，后雨刷通过反转齿轮驱动.- Windscreen and rear window wash pump 前后雨刷电机- Indicator control指示控制 - Electric load management switches off below 11.8 V, as with the Touran电能负荷管理，系统典雅低于11.8V时关闭，与途安一样- Interior lighting control: terminal 30G, via which the interior lighting is supplied with power, is switched by the on-board network control unit内部灯控制，通过30号线线向内部照明灯提供电源，通过车载控制单元关闭。.- Heated rear window: if the button for the heated rear window is pressed, the rear window is activated by the on-board network control unit后风窗加热按下后场加热开关，后窗加热通过车载控制单元激活.- Terminal control: the on-board network control unit controls terminal 75x via relief relay for X-contact. Terminal 15 is controlled via the relay for power supply terminal 15 in the electrical box. Terminal 50 is controlled