- Process Module 说明 ：A. 下料 （ Cut Lamination） a-1 裁板 .ppt

* * Process Module 說明 : A. 下料 ( Cut Lamination) a-1 裁板 ( Sheets Cutting) a-2 原物料發料 (Panel)(Shear material to Size) B. 鑽孔 (Drilling) b-1 內鑽 (Inner Layer Drilling ) b-2 一次孔(Outer Layer Drilling ) b-3 二次孔 (2nd Drilling) b-4 雷射鑽孔 (Laser Drilling )(Laser Ablation ) b-5 盲(埋)孔鑽孔 (Blind Buried Hole Drilling) C. 乾膜製程 ( Photo Process(D/F)) c-1 前處理 (Pretreatment) c-2 壓 膜 (Dry Film Lamination) c-3 曝 光 (Exposure) c-4 顯 影 (Developing) c-5 蝕銅 (Etching) c-6 去膜 (Stripping) c-7 初檢 ( Touch-up) c-8 化學前處理,化學研磨 ( Chemical Milling ) c-9 選擇性浸金壓膜 (Selective Gold Dry Film Lamination) c-10 顯 影(Developing ) c-11 去膜(Stripping ) D. 壓 合 Lamination d-1 黑 化 (Black Oxide Treatment) d-2 微 蝕 (Microetching) Developing , Etching Stripping ( DES ) d-3 鉚釘組合 (eyelet ) d-4 疊板 (Lay up) d-5 壓 合 (Lamination) d-6 後處理 (Post Treatment) d-7 黑氧化 ( Black Oxide Removal ) d-8 銑靶 (spot face) d-9 去溢膠 (resin flush removal) E. 減銅 (Copper Reduction) e-1 薄化銅(Copper Reduction) F. 電鍍 (Horizontal Electrolytic Plating) f-1 水平電鍍 (Horizontal Electro-Plating) (Panel Plating) f-2 錫鉛電鍍 ( Tin-Lead Plating ) (Pattern Plating) f-3 低於 1 mil ( Less than 1 mil Thickness ) f-4 高於 1 mil ( More than 1 mil Thickness) f-5 砂帶研磨 (Belt Sanding) f-6 剝錫鉛 ( Tin-Lead Stripping) f-7 微切片 ( Microsection) G. 塞孔 (Plug Hole) g-1 印刷 ( Ink Print ) g-2 預烤 (Precure) g-3 表面刷磨 (Scrub) g-4 後烘烤 (Postcure) H. 防焊(綠漆): (Solder Mask) h-1 C面印刷 (Printing Top Side) h-2 S面印刷 (Printing Bottom Side) h-3 靜電噴塗 (Spray Coating) h-4 前處理 (Pretreatment) h-5 預烤 (Precure) h-6 曝光 (Exposure) h-7 顯影 (Develop) h-8