OpenFlow初级安装测试教程--OpenvSwitch交换机和Floodlight.pptVIP

关注微博@openflow世界 关注微博@openflow世界 OpenFlow初级安装测试教程--OpenvSwitch交换机和Floodlight安装记录 请关注新浪@Openflow世界 2012.11.6 拓扑图 Control path Data path OVS1 OVS2 Switching hub eth0 eth0 eth2 eth1 eth3 eth3 Host1 Host2 PC1 PC2 OpenFlow Controller 01 02 1 2 安装的开源POX控制器 HUB集线器 总共5个PC，1个当控制器，2个当交换机安装Openflow， 2个当host。控制器和交换机我安装的是ubuntu12.4系统 支持4网卡的PC1，PC2 实际安装我4个Openflow 交换机 请关注我的微博 @Openflow世界 1 2 00 安装和运行控制器Floodlight Install $ git clone git:///floodlight/floodlight.git sudo apt-get install build-essential default-jdk ant python-dev Build $ cd floodlight; sudo ant Run $ cd floodlight/target; run with command:“java -jar floodlight.jar“ Floodlight is now waiting for OpenFlow switches to connect... Startup sudo insmod $OVS_HOME/datapath/linux/openvswitch.ko sudo ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock \ --remote=db:Open_vSwitch,manager_options \ --private-key=db:SSL,private_key \ --certificate=db:SSL,certificate \ --bootstrap-ca-cert=db:SSL,ca_cert \ --pidfile –detac sudo ovs-vsctl --no-wait init (first time for initialization) sudo ovs-vswitchd --pidfile –detach (start command) Download wget /releases/openvswitch-1.7.1.tar.gz tar –zxvf openvswitch-1.7.1.tar.gz Install sudo ./boot.sh; ./configure; sudo make;make install sudo insmod $OVS_HOME/datapath/linux/openvswitch.ko sudo mkdir -p /usr/local/etc/openvswitch sudo ovsdb-tool create /usr/local/etc/openvswitch/conf.db vswitchd/vswitch.ovsschema 安装Open vSwitch 安装都可参考里面的INSTALL_Linux说明 这些都可以从INSTALL_Linux文件copy Configure br0 $ sudo ovs-vsctl add-br br-int $ sudo ovs-vsctl add-port br0 eth3 $ sudo ifconfig eth0 0; $ sudo ifconfig br0 01 netmask Make sure can ping from br0 to controller IP(00) Connect controller $sudo ovs-vsctl set-controller br0 tcp:00:6633 Verify connection $ sudo ovs-vsctl show 连接controller 新建br0，且确保br0与controller能ping通 连接controller的命令如下 手动添加flow命令 建议查询ovs-ofctl的使用手册如下: /cgi-bin/ovsman.cgi?page=utilities%2Fovs-ofctl.8 或是参考我们前期的openswitch 手动添加flow命令 本拓扑的FLOW命令 SW1上添