c4400(无石棉).docVIP

材质 无石棉 规格 形状 1500mm*2000mm*3.0 适用 范围 广泛 产品 说明 高品质非石棉材料，它有最高化学稳定性及耐热能力的纤维组成。在高温及高压下，潜变阻力特出，提供高安全，扭矩维持能力及极优的密封特性。 适合用于水、气体、碳氢化验及中强度的酸。 两面皆有3XA防粘贴表面处理，方便脱离凸缘。 最高使用温度：400℃ 最高压力：100BAR KLINGERsil C4400 Premium quality non-asbestos material composed of fibres with heat resistance. Outstanding creep resistance at high temperatures and high loads provides maximum safety, high torque retention and excellent sealing characteristics. Suitable for use on water, gases, hydrocarbons, akalis and medium strength acids.3XA Anti-stick coating on both sides aids flange seperation, reducing installation time. It also removes the need for application of grease or sealants which may cause gasket failure. Technical Data Please note that these figures are provided as guidelines only. These limits do not necessarily operate together for all gasket thicknesses and service conditions. Reference thickness 2.0 mm. All temperatures and pressures are dependent on chemical compatiblity, refer to KLINGER chemical compatibility chart or KLINGERexpert PC design software. Maximum Operating Temperature 400 癈0 Maximum Operating Pressure 100 bar Compressibility ASTM F36A 11 % Recovery ASTM F36A (min) 55 % KLINGER hot compression test 25 MPa 300癈b Thickness decrease 23癈n 10 % Thickness decrease 300癈 22 % Tensile strength ASTM F152 across grain 15 MPa Gas leakage DIN 3535/6 0.2 ml/min Stress Relaxation BS7531 23 MPa Stress Relaxation DIN 52913 (16h, 300癈)癈 25 MPa Weight increase ASTM F146 ASTM Oil No. 3 (5h/150癈)6 3 % ASTM Fuel B (5h/23癈)5 5 % Thickness increase ASTM F146 ASTM Oil No. 1 (5h/150癈)F 0 - 5 % ASTM Oil No. 3 (5h/150癈)F 0 - 5 % ASTM Fuel A (5h/23癈)5 0 - 5 % ASTM Fuel B (5h/23癈)5 0 - 5 % Density 1.6 g/cm? Note: Test standards used are universally accepted fortesting non-asbestos materials. APPROVALS Gas Supply - DVGW No. 88.01e052 (German Gas Water Association) Potable Water - WRC (Water Research Council, UK) Oxygen Gas Approval (100bar/80癈) - BAM (Geerman Fede