纯净水水桶清洗机设计.doc

 Specialty and Grade：Machine Design Manufacturing and Their Automation Number： Name： 　 Advisor： Professor Submitted time:  摘要 I Abstract I 1 引言 1 1.1本设计的目的和意义 1 1.2本设计所要解决的问题 1 1.3完成的主要内容 1 2纯净水水桶清洗的特点及要求 2 2.1特点 2 2.2要求 2 3纯净水水桶的概述 3 4纯净水桶清洗机机械设计 5 4.1总体方案设计 5 4.2水桶刷子设计 6 4.2.1水桶的特点 6 4.2.2刷子的机构设计 7 4.2.3机构工作原理 9 4.3旋转杆机构设计 10 4.3.1旋转杆的工作原理 10 4.4机座设计 11 4.5气水混合装置设计.................................................12 4.6传动机构.........................................................13 6控制电路设计 14 结束语 15 参考文献 16 致 谢 17 附录 18 摘要 纯净水是生活必需品，桶装水是目前市场上销售量最多的水，而盛装纯净水的水桶是多次循坏利用，由于纯净水中矿物质的沉淀，附着在水桶内壁的沉淀物，在使用一段时间的水桶内壁形成一层水垢。此时，就需要对水桶内壁进行清洗，考虑到市场上现有的纯净水桶都是统一规格、数量多，清洗水桶的工艺不需要常改变，为清洗带来了许多不必要的麻烦，但是在设计中，水桶的内径不一致，桶口内径比桶身内径小的多，且桶身内径是清洗的主要目标，给清洗水桶带来极大的困扰。为能快速、方便地清洗水桶内壁，设计一种纯净水水桶内壁的清洗机。 本课题可以在提高，巩固理论知识的同时，锻炼学生的实际动手能力，使学生的生产和科研综合能力经受一次初步检验，为从事相应岗位的技术工作好准备。 关键词：纯净水水桶；清洗；机械化 Abstract Pure water is life necessities, bottled water is sold on the market at present most of the water, and holding water bucket is loop used for many times, due to precipitation of minerals in the water, attached to the bucket wall of sediment, in use for a period of time the bucket wall to form a layer of scale. At this point, you need to clean the inner wall of the bucket, given the existing on the market of pure water are unified specification, quantity, cleaning process does not need to change often, bucket for cleaning brought a lot of unnecessary trouble, but in the design, the inner diameter of the bucket, bucket mouth diameter much smaller than the barrel body diameter, and the inner diameter is the main target of cleaning of the barrel body, to a great cleaning bucket. In order to quickly and easily to clean bucket wall, design a kind of pure water bucket wall washer. This topic can be improved, consolidating theory knowledge at the same time, exercise the students practical ability,