Materials Science and Engineering： A.doc

Materials?Science?and?Engineering:? A 材料科学与工程：A 卷 Vol.621,?5?Jan.?2015 序号 目次信息 1 篇名：High temperature deformation behavior of Mg67Zn28Ca5?metallic glass and its composites Mg67Zn28Ca5金属玻璃及其复合材料的高温变形行为 作者：X.L. Fu, M.J. Tan, Y. Chen, A.E.W. Jarfors, M. Gupta, C.H. Shek 2 篇名：Effect of heating rate on mechanical property, microstructure and texture evolution of Al–Mg–Si–Cu alloy during solution treatment Al–Mg–Si–Cu合金在固溶处理过程中加热速率对其力学性能，微观结构和织构的影响 作者：Xiaofeng Wang, Mingxing Guo, Lingyong Cao, Jinru Luo, Jishan Zhang, Linzhong Zhuang 3 篇名：Spark plasma sintering of an Al-based powder blend Al基粉末混合物的火花等离子烧结 作者：S. Rudinsky, J.M. Aguirre, G. Sweet, J. Milligan, D.P. Bishop, M. Brochu 4 篇名：Effect of bismuth and strontium interaction on the microstructure development, mechanical properties and fractography of a secondary Al–Si–Cu–Fe–Zn alloy 铋和锶的相互作用对 第二相的Al–Si–Cu–Fe–Zn合金的组织发展，力学性能和金相断面的显微镜观察的影响 作者：Saeed Farahany, Mohd Hasbullah Idris, Ali Ourdjini 5 篇名：Dynamic strain ageing, deformation, and fracture behavior of modified 9Cr–1Mo steel 改良的9Cr -1Mo钢的动态应变时效，变形，和断裂行为 作者：Preeti Verma, G. Sudhakar Rao, P. Chellapandi, G.S. Mahobia, Kausik Chattopadhyay, N.C. Santhi Srinivas, Vakil Singh 6 篇名：Development of pseudoelasticity in Fe–10Ni–7Mn (wt%) high strength martensitic steel by intercritical heat treatment and subsequent ageing 在 Fe–10Ni–7Mn 高强度马氏体钢通过临界区热处理和随后的时效伪弹性的发展 作者：H.R. Koohdar, M. Nili-Ahmadabadi, M. Habibi-Parsa, H.R. Jafarian 7 篇名：Spark plasma sintering and hydrogen pre-annealing of copper nanopowder 铜纳米粉末的火花等离子烧结和氢气预先退火 作者：Judith Monnier, Yannick Champion, Lo?c Perrière, Benjamin Villeroy, Claude Godart 8 篇名：A study of direct forging process for powder superalloys 研究粉末高温合金的直接锻造工艺 作者：Q. Bai, J. Lin, J. Jiang, T.A. Dean, J. Zou, G. Tian 9 篇名：Investigation of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression–shear 研究滞弹性镍钛在单轴拉伸，压缩和压缩 -剪切作用下的应力诱发马氏体相变 作者：C. Elibol, M.F.-X. Wagner 10 篇名：Effect of mic