GC-HX503中英文混合说明书.pptVIP

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ 68 51 ① 自动光圈镜头接口 ② 自动光圈镜头选择开关 ③ 同步选择开关 ④ 视频输出接口 ⑤ 电源输入接口 ⑥ 电源指示灯 ⑦ 直流驱动镜头电流调整 (当使用直流驱动镜头时) ⑧ 垂直相位调整钮 (当使用线路锁定同步方式时) 机器各个部分名称及功能 [unit : mm] 148 GC-HX503 Outlines Honeywell’s GC-HX503 is a high sensitivity CCD color camera with high sensitivity function of the field integration technique. Features ? 1/3” IT Super HAD CCD ( NTSC: 410,000 / PAL: 470,000 ) ? Outstanding BLC implementation with Honeywell’s BMB(Black Mask BLC) function. ( 3 levels adjustable ) ? CS/C lens mount. ? Excellent signal-to-noise ratio of more than 50dB. ? High Sensitivity : Minimum illumination of 0.001lx ( F1.2, 30IRE, SENS On X 128 ) ? 2-WAY Auto Iris : Video iris or DC iris lens can be used. ? External synchronization with LINE LOCK. ? Auto White Balance : Auto white balance realizes true color reproduction within various light sources. ( 2,800 oK~8,000 oK ) ? Control : Flickerless, Back light compensation , AGC , Manual shutter control, Maximum Sensitivity select, Auto white Balance/ Indoor/Outdoor/Fluorescent light/ BMB Level 3 4 Installation Mounting a Lens 1. Remove the protective cap in front of the camera. 2. Confirm the mount ring whether it is for C or CS. * Caution1 3. Attach the lens to the lens mount ring. 4. If the lens has an Auto Iris mechanism, connect the iris cable to the Lens connector (EE/VSD S/W must be set to VSD on the side of the camera) A. In the case of having no iris amplifier : Set the slide switch to DC (Down side) B. In the case of having iris amplifier : Set the slide switch VSD (Upper side) C. Set the S/W on the side of the camera to DC or VSD, too. ? If using lens that has iris amplifier, “LEVEL” and “ALC” volume of lens must be adjust carefully. It may cause any hunting. ? When connecting Auto iris lens, be sure to use the connector to be recommended by manufacturer. (E4-191, Chuo Musen, Japan) * Caution 1 : This appliance is set to CS mount default.