61211298 Decanter 2Touch Data Exchange and Signal Mapping R14.pdf

Decanter 2Touch Data Exchange and Signal Mapping Revision 14 Decanter 2Touch Data Exchange and Signal Mapping Revision 14 released on February 08, 2012. Added words 17, 20, 147. Updated word 164 Heart Beat. Matches Decanter 2Touch software package V2.03.00 Revision 13 released on September 22, 2011. Feed Solids word 16 implemented. Matches Decanter 2Touch software package V2.02.02 Revision 12 released on August 25, 2011. Added load recipe bits to words 45 and 152. Revision 11 released on July 25, 2011. Updated signal mapping to match Decanter 2Touch software package V2.02.01: Recipe. Revision 10 released on June 30, 2011. Updated signal mapping to match Decanter 2Touch software package V2.02.00. Revision 10 released on June 30, 2011. Updated signal mapping to match Decanter 2Touch software package V2.02.00. Revision 14 Decanter 2Touch Data Exchange and Signal Mapping General Decanter 2Touch controls support various protocols for customer remote connection: Modbus RTU/ASCii, Modbus TCP, Ethernet IP, ISO S7 Ethernet, Profibus DP Protocol conversion is done in the HMI and physical connections are made in a following way: Profibus DP customer network is connected to the Profibus DP adapter mounted on the back of the HMI. Recommended type Expansion Module EM-Profibus DP, HW:05190A, AL art number03. Modbus RTU customer network connects directly to either to HMI COM1 port RS422/485 or to HMI COM2 port RS232. For a system with a T150 panel, the customer Ethernet connection (for Modbus TCP etc) is to be made to the Controller Panel RJ45 connector X21. Revision 14 Decanter 2Touch data exchange and signal mapping For a system with a TA150 panel, the customer Ethernet can be connected to Ethernet Port 2 on the TA150 panel. Revision 14 Decanter 2Touch data exchange and signal mapping Revision 14 Decanter 2Touch data exchange and signal mapping The values exchanged