《《Coating》.pdf

NORSOK STANDARD COMMON REQUIREMENTS SURFACE PREPARATION AND PROTECTIVE COATING M-CR-501 Rev. 1, December 1994 Surface Preparation and Protective Coating M-CR-501 Rev. 1, December 1994 CONTENTS 1 FOREWORD2 2 SCOPE2 3 NORMATIVE REFERENCES2 4 DEFINITIONS AND ABBREVIATIONS 3 5 GENERAL REQUIREMENTS 4 5.1 General4 5.2 Planning4 5.3 Equipment protection and clean up 4 5.4 Ambient conditions4 5.5 Coating materials 5 5.6 Steel materials5 5.7 Unpainted surfaces 5 5.8 Handling and shipping of coated items 5 5.9 Prequalification of products, personnel and procedures5 5.10 Metal coating 6 6 HEALTH, SAFETY AND ENVIRONMENT6 7 SURFACE PREPARATION6 7.1 Pre-blasting preparations 6 7.2 Blast cleaning 7 7.3 Final surface condition 7 8 PAINT APPLICATION 7 8.1 General7 8.2 Application equipment 7 8.3 Application 8 8.4 Repairs8 9 THERMALLY SPRAYED METALLIC COATINGS8 9.1 General8 9.2 Coating materials 8 9.3 Application of thermally sprayed coating 9 9.4 Field coating of pipes and coating of infill steel 9 9.5 Repairs9 10 QUALIFICATION REQUIREMENTS9 10.1 Pre-qualification of products 9 10.2 Qualification of personnel 10 10.3 Qualification of procedures 12 11 INSPECTION AND TESTING13 ANNEX A - COATING SYSTEMS14 ANNEX B - COLOURS18 ________________________________________________________________________________ NORSOK Standard 1 of 18 Surface Preparation and Protective Coatin