《《lib_hydraulic_component_design》.pdf

Hydraulic Component Design Library Rev 10 – November 2010 Copyright © LMS IMAGINE S.A. 1995-2010 AMESim® is the registered trademark of LMS IMAGINE S.A. AMESet® is the registered trademark of LMS IMAGINE S.A. AMERun® is the registered trademark of LMS IMAGINE S.A. AMECustom® is the registered trademark of LMS IMAGINE S.A. LMS Imagine.Lab is a registered trademark of LMS International N.V. LMS Virtual.Lab Motion is a registered trademark of LMS International N.V. ADAMS® is a registered United States trademark of MSC.Software Corporation. MATLAB and SIMULINK are registered trademarks of the Math Works, Inc. Modelica is a registered trademark of the Modelica Association. UNIX is a registered trademark in the United States and other countries exclusively licensed by X / Open Company Ltd. Python is a registered trademark of the Python Software Foundation. Windows is the registered trademark of the Microsoft Corporation. All other product names are trademarks or registered trademarks of their respective companies. TABLE OF CONTENTS 1. Introduction 1 2. Tutorial examples 3 2.1. Constructing hydraulic check valves using HCD 3 2.2. Constructing a hydraulic jack using HCD 10 2.3. Constructing spool valves 15 2.4. 3-position 3-port hydraulic directional control valve 18 2.5. Hydraulic jack with moving body 23 3. A Few General Rules 25 3.1. Introduction 25 3.2. Causality 25 3.3. Use of special facilities for setting parameters 26 3.4. Use of the mass dynamics blocks 26 3.5. Setting chamber length at zero displacement 26 3.6. Major reconstructions 27 November 2010 Table of contents 1/ 1 November 2010 Table of contents