《《框架节点抗震性能试验研究 非地震的详细设计 Seismic Behavior of Nonseismically Detailed Interior JointsPart2》.pdf

ACI STRUCTURAL JOURNAL TECHNICAL PAPER Title no. 100-S7 Seismic Behavior of Nonseismically Detailed Interior Beam-Wide Column Joints—Part II: Theoretical Comparisons and Analytical Studies by Bing Li, Yiming Wu, and Tso-Chien Pan The experimental results of four full-scale reinforced concrete interior with the emphasis on the effect of joint transverse reinforce- beam-wide column joints with nonseismic detailing and limited ments, column axial load, and bond condition on the joint’s seismic detailing have been presented in the previous paper. Due to behavior. By using this method, not only were the experi- the unique features of the test specimens and the inherent complexity mental results further verified and analyzed , but an inves- of beam-column joints, however, such a study is not sufficient. tigation into the effects of some critical parameters has been Therefore, in this paper, an analytical investigation would be useful carried out. to provide a better understanding of the seismic behavior of such beam-wide column joints. The developed finite element models were described and verified using the results of the experimental RESEARCH SIGNIFICANCE results presented in the previous paper. The global behavior and The seismic behavior of beam-column joints is influenced the principal stresses of the interior beam-wide column joints were by many parameters. Due to the inherent complexity of the discussed and examined in detail. The calculated results indicated joints, the effects of the combin