《AC7110-1 Rev F AUDIT CRITERIA FOR BRAZING %28TORCH AND INDUCTION%29》.pdf

AC7110/1 REV. F AUDIT CRITERIA Issued 1995-01-06 161 Thorn Hill Road Revised 2013-01 Warrendale, PA 15086-7527 Superseding AC7110/1 REV E TO BE USED ON AUDITS ON OR AFTER AUGUST 28, 2011 Nadcap AUDIT CRITERIA FOR BRAZING (TORCH INDUCTION) EDITORIAL CHANGE – Jan’13: Remove checkbox for baseline as this is default requirement; Questions at para 7.5.1, 7.5.2, 7.5.3, 7.5.4 and 7.6.2 moved to paras 11 and 12 as they can only be verified in the job aud it. Re-number subsequent questions in Para 7. 1. SCOPE This checklist is to be used as a supplement to PRI AC7110, for suppliers seeking torch and induction brazing accreditation. If suppliers are seeking torch and induction brazing accreditation in conjunction with a Nadcap audit per AC7102 and no welding process accreditation is sought, then assessment to AC7110 is not required. 2. GENERAL INFORMATION In completing this assessment, auditors are instructed to respond with a ‘yes’ or ‘no’ to address compliance with each statement or requirement. For any negative response, the auditor must clearly indicate in the NCR if the ‘no’ reflects noncompliance with respect to existence, adequacy, and/or compliance. Existence relates to evidence of a documented procedure or policy, adequa