《D2_WS2-Valve_TetraV12》.pdf

Chapter 4 Volume Meshing – Workshop 2 Valve Meshing ICEM CFD Introductory Course ANSYS, Inc. Proprietary July 2009 © 2009 ANSYS, Inc. All rights reserved. WS4.2-1 Inventory #002664 Volume Meshing – Workshop 2 Set Working Directory Training Manual • Set working directory – File Change Working Dir… – Choose Valve – OK • To Import The Geometry – File - Import Geometry - ParaSolid – Select: Valve.x_t using File Browser and Open – Set Units to Millimeter in the DEZ and Apply ANSYS, Inc. Proprietary July 2009 © 2009 ANSYS, Inc. All rights reserved. WS4.2-2 Inventory #002664 Volume Meshing – Workshop 2 Build Topology Training Manual • Geometry Repair Geometry Build Diagnostic Topology – Accept all defaults – Apply • Display the geometry – Display: activate Surfaces by left mouse clicking in the check box – Display: Solid Wire mode thru right mouse click on Surfaces in Display Tree ANSYS, Inc. Proprietary July 2009 © 2009 ANSYS, Inc. All rights r