《在vmware虚拟机中安装Paloalto下一代防火墙NGFW(英文)》.pdf

Installing the PA 100 VM in VMware Workstation 9.x Johan Loos johan@accessdenied.be Version 1.0 Introduction The PA 100-VM is a virtual firewall delivered as a V Mware OVF. This is a way to package and distribute virtual machines. This file contains all the files needed to run your file into a virtual environment. I’m not running a VMware ESXi in my environment, but I have a VMware workstation 9.x on Windows 7 64-bit. When you buy a virtual instance of the firewall, you receive the authorization codes from your reseller. When you import the files into VMware workstation, two cores are reserved, 4 GB of RAM and two network adapters. PA-VM VMware Workstation 2 NIC 1 NIC2 NIC 3 40 GB 4 GB CPU The first network adapter is used for management, the second network adapter is used as ethernet1/1 and the third network adapter is used as ethernet1/2. Additional network adapters can be added and are used as Ethernet interfaces by the firewall. It is important that these network adapters support vmxnet3. The can be verified in the virtual machine configuration file (.vmx). The following steps describe how to install the VM and configure your management access. Installing the PA 100 VM in VMware Workstation 9.x 2 Obtaining the bits task list  Logon into the portal page on Palo Alto Networks  Register your device  Download and extract the source package  Import your VM firewall into VMware workstation  Configuring the management interface  Register your firewall  Update your device  Clone a licensed device  Managing the device Logon into the portal page on Palo Alto Networks 