《Welding Engineer》.pdf

IIW Guideline PERSONNEL WITH RESPONSIBILITY FOR WELDING COORDINATION Minimum Requirements for the Education, Examination and Qualification IAB-252-07 © Copyright EWF 1995 IAB – INTERNATIONAL AUTHORISATION BOARD IAB-252-07/SV-00 MINIMUM REQUIREMENTS FOR THE EDUCATION, TRAINING, EXAMINATION, AND QUALIFICATION Personnel with Responsibility for Welding Coordination (as described in ISO 14731 and other International and National Standards) International Welding Engineer (IWE) former : Doc. IAB-002-2000/EWF-409 Rev. 2 International Welding Technologist (IWT) former : Doc. IAB-003-2000/EWF-410 Rev. 2 International Welding Specialist (IWS) former : Doc. IAB-004-2000/EWF-411 Rev. 1 International Welding Practitioner (IWP) former : Doc. IAB-005-2002/EWF-451 Rev. 1 Prepared and issued by the IAB-International Authorisation Board Under the authority of the IIW-International Institute of Welding This is a reduced version; it is not the full Guideline For more information regarding the Qualification System, the IAB/EWF Combined Secretariat or the National ANB should be contacted (see in the IIW site the ANB contacts) Published by: EWF-IAB/IIW Secretariat Av. Prof. Dr. Cavaco Silva, 33 Taguspark – Apartado 012 P-2741-901 Porto Salvo Portugal Tel: +351.21 421