《各国插头安规尺寸》.pdf

Appendix 1 Error! Reference source page 1 of 1 not found. (澳规)Australia integrated plug according to AS/NZS 3112:2000 for AU type H G I J 2.8 TABLE: Australia plug dimension according to AS 3112 figure 2.1 C E P Part Dimensions Limit Measured Pass/Fail No. Distance from projection part edge to L and N pins 9mm min. A Width of live pin 6.35 ± 0.15mm C Thick of live pin metal part 1.58 to 1.78mm Thick of live pin insulated part 1.58 to 1.78mm D Pin center to plug center 7.92mm F Length of live pin 17.06 ± 0.4mm F Length of live pin insulated part 8.7 ± 0.5mm G Length of plug base 27.0mm or 21.9mm H Length of plug base 27.0mm or 21.9mm I Length of plug base 27.0mm or 21.9mm Appendix 1 Error! Reference source page 2 of 2 not found. (澳规)Australia integrated plug according to AS/NZS 3112:2000 for AU type J Length of plug base 27.0mm or 21.9mm Radial of plug projection part R 21mm max. Height of plug projection part 8.6mm min. Note: *1) the detachable integrated plug is installed in the AC/DC adapter during the measurement. Appendix 2 Error! Reference sour