《Kinco步科各产品常见问题解决手册英文高清版非常实用》.pdfVIP

工控编程吧工控编程吧 Kinco Servo FAQ1407 2014-11-13 13:51:20Source: Hits:0 1. How to connect servo to Kinco Servo software? Please note the following items: a. If you use Kinco Servo in Windows 7/Windows 8, please right click to “Run As Administrator”, but do not double click to open it directly. b. The connection cable CD Servo driver: CD2/FD/JD Servo driver: direct cable: c. If you still cannot download the program, please change a USB to RS232 cable or use a PC which has RS232 cable itself 2. When power on the servo, the LED is off For Kinco servo, the 24V control power supply is separated from the 220/380 V power supply, user needs to connect 24V power supply, then the driver can work. 工控编程吧 3. When power on the servo, the LED displays FFF.F. The Motor Model (parameters) is not configured in the driver. For Kinco servo, one driver can drives different power range of servo motors, so user needs to configure the servo motor in servo driver, if you use Kinco servo motor, you just need to select a motor type , then all the servo motor parameters are set. 4. How to Upload parameters from servo to PC 4.1.ExtendRead Driver Config 4.2.Open a cdo file . This cdo file is a formate of parameter list of our servo. Then read(takes about serival seconds)Save. Save the cdi file in your PC. The next time you can download this cdi file to other servo. 工控编程吧工控编程吧 4.3. Download 4.3.1:.ExtendWrite Driver Config 4.3.2.Open Choose a cdi file that you saved in your PC. Then Write(it takes about serival seconds)Save ParameterReboot Driver 5. When enable the driver , the LED displays the Pn. L In the default setting of Servo IO, the DIN5 and DIN6 are set as positive and ne