ASE-TypeQuestions-JonesBartlettLearning.docVIP

Chapter 32 Disc Brake System NATEF Tasks Brakes General Brakes Systems ? Describe procedure for performing road test to check brake system operation, including an anti-lock brake system (ABS). MLR, AST, MAST (p 1071) ? Identify and interpret brake system concern; determine necessary action. AST, MAST (p 1071–1072) Hydraulic System ? Diagnose poor stopping, pulling, or dragging concerns caused by malfunctions in the hydraulic system; determine necessary action. AST, MAST (p 1072) Disc Brakes ? Diagnose poor stopping, noise, vibration, pulling, grabbing, dragging or pulsation concerns; determine necessary action. AST, MAST (p 1072) ? Remove and clean caliper assembly; inspect for leaks and damage/wear to caliper housing; determine necessary action. MLR, AST, MAST (pp 1072–1075) ? Clean and inspect caliper mounting and slides/pins for proper operation, wear, and damage; determine necessary action. MLR, AST, MAST (pp 1075–1076) ? Check brake pad wear indicator; determine necessary action. MLR, AST, MAST (pp 1075–1077) ? Remove, inspect, and replace pads and retaining hardware; determine necessary action. MLR, AST, MAST (p 1077) ? Lubricate and reinstall caliper, pads, and related hardware seat pads and inspect for leaks. MLR, AST, MAST (pp 1078–1080) ? Retract and readjust caliper piston on an integrated parking brake system. MLR, AST, MAST (pp 1080–1081) ? Clean and inspect rotor, measure rotor thickness, thickness variation, and lateral runout; determine necessary action. MLR, AST, MAST (pp 1082–1084) ? Remove and reinstall rotor. MLR, AST, MAST (pp 1084–1086) ? Refinish rotor on vehicle; measure final rotor thickness and compare with specifications. MLR, AST, MAST (pp 1086–1088) ? Refinish rotor off vehicle; measure final rotor thickness and compare with specifications. MLR, AST, MAST (pp 1087–1090) ? Inspect and replace drive axle wheel studs (NATEF, Drive axles). MLR, AST, MAST (pp 1091–1093) ? Install wheel and torque l