毕业论文日产120吨天然矿泉水厂的设计.docVIP

日产120吨天然矿泉水厂的设计 摘　　要 本设计为日产120吨天然矿泉水厂的设计，设计包括可以同时生产桶装水和瓶装水。并对产品生产方案的制定，生产工艺的设计，车间平面布置的安排进行了详细的讨论，利用AutoCAD制作出车间的工艺流程图和平面布置图设计采用，每天工作16小时，每班工作8小时生产瓶装矿泉水吨，生产桶装矿泉水吨；每班每天生产瓶装水吨，生产瓶；每班每天生产桶装水吨，生产桶。 The design of a plant with processing 120 tons mineral water Abstract The design was the daily production of 120 tons of natural mineral water plant, and this also included the production of barreled water and bottled water. The design discussed the production plan, production process, workshop layout arrangement in detail, produced workshop production process flow diagram and layout by using AutoCAD; as well as calculated material balance, heat balance in the process of the mineral water , set the enterprise management structure by the equipment selection, water vapor equilibrium, labor force balance , the implementation plan for environmental protection and sewage treatment, and estimated the investment cost, profit and the recovery period. This factory used a shift system, divided into two groups for the production, working time was 16 hours a day, and each class was 8 hours. According to the production capacity of equipment, determining the daily production of bottled mineral water was 51.74 tons, the production of barreled mineral water was 72.87 tons. Each class daily production of bottled water was 25.87 tons, and produced 45454 bottles per day, the same time the production of barreled water was 36.43tons, produced 1851 barrels a day. The investment of the project was RMYuan, profit was 8508200 Yuan, and recovery period of it was about2.2years. Keywords: Natural mineral water factory; Process design; Layout; Technical and economic analysis. 千万不要删除行尾的分节符，此行不会被打印。在目录上点右键“更新域”，然后“更新整个目录” 目　　录 摘　　要 I Abstract II 第1章 绪　　论 1 1.1 天然矿泉水行业现状 1 1.1.1 我国矿泉水行业的现状 1 1.1.2 国际矿泉水行业的现状 2 1.2 矿泉水的定义与分类 3 1.2.1 矿泉水的定义 3 1.2.2 矿泉水的分类 3 1.3 矿泉水的保健作用 4 第2章 厂址的选择及建设规模 5 2.1 厂址的选择 5 2.2 土建的要求 5 2.3 产品的设计及班产量的确定 6 第3章 工艺流程确定及论证 7 3.1 生产工艺 7 3.1.1 引水 7 3.1.2 曝气 7 3.1.3 过滤 7 3.