油漆喷砂方案摘要.doc

China Nuclear Industry Fifth Construction Corporation 中国核工业第五建设公司 编号：CNF/CM-FA-GD-001 Docu Type 文件类型 Docu Page 文件页数 Attachment Page 附件页数 Revision Explanation 修订说明 Controlled NO 受控编号 FA 14 Docu Title: 文件标题： Blasting Painting Method Statement of Bayer MDI MNB/ANILINE 拜耳异氰酸酯和聚醚项目MDI联合装置硝基苯生产单元和苯胺生产单元 喷砂油漆方案 1st edition 第一版 2007.3.26 Edition版次 Issue date 发布日期 Execute date 实施日期 Compile 编 制 Review 审 核 Approval 批 准 CNF China Nuclear Fifth Construction Corporation 中国核工业第五建设公司  Content 目 录 一 General 工程概况 二 Reference 编制依据 三 Work Content and Operation Flow 工作内容及操作流程 四 Quality Requirement 质量要求 五 Safety Measure and Housekeeping 安全措施及文明施工 一 General 工程概况 purpose and applicable scope 目的与适用范围 This statement is compiled for blasting, painting and installation instruction of Carbon Steel pipe and support in Bayer MDI MNB/ANILINE. The purpose is to instruct for the handling of Carbon Steel surface and painting work. This statement is applicable for the blasting and painting of various attached part surface, such as Carbon Steel pipe, steel component and pipe support, which is to guide construction team to conduct blasting and painting work as per design and technical standard and requirement. This proposal shall meet the design and technical specification and standard requirement. 本方案是为拜耳异氰酸酯和聚醚项目MDI联合装置硝基苯生产单元和苯胺生产单元。装置中的碳钢管道、支架的，油漆、喷砂，作业安装指导而编制，编写本文的目的是为了对碳钢表面的处理及涂装作业进行指导。本方案适用于碳钢管道、钢构件、管道支架等各类附属部件表面预处理喷砂、油漆涂装等工作, 旨在指导施工班组按设计及技术规范标准要求进行油漆喷砂安装作业，使油漆喷砂作业质量能符合设计及技术规范标准要求。 二 Reference 编制依据 GB-8923-88 《corrosion grade and rust removing grade on steel material surface before painting》 GB-8923-88 《涂装前钢材表面锈蚀等级和除锈等级》 SYJ4007-86《handling specification of steel material surface before painting》 SYJ4007-86《涂装前钢材表面处理规范》 SY/T 0063-1999《leakage test method of pipe corrosion prevention layer》 SY/T 0063-1999《管道防腐层检漏试验方法》 HGJ229《construction and acceptance specification of chemical equipment and pipe anti-corrosion project》 HGJ229《化工设备、管道防腐蚀工程施工及验收规范》 SYYT4