工厂制造设备涂漆部分技术规定介绍.doc

XX气田工程 工厂制造设备涂漆部分技术规定 文件号：Document No.: 中国石油工程设计有限责任公司西南分公司 CHINA PETROLEUM ENGINEERING CO., LTD SOUTHWEST COMPANY 工程设计证书: A111001641 综甲Design Certificate No.:A111001641 Class:A 工程勘察证书:010065-kj 甲级Survey Certificate No.:010065-kj Class:A 工程咨询证书:工咨甲20120070053Consult Certificate No.:20120070053 Class:A 日期DATE:20 专业名称DISCIPLINE 编制PRPD 校对CHKD 审核 审定 阴极保护 U04 　供ssued for Construction （） 2011.12.01 U03 　供 Issue for Construction 2011.1.13 U02 　供 Issue for Construction 2010.08 U01 　供 Issue for Construction 2009.11.10 版 次REVISION 描 述DESCRIPTION 编制人 批准人 时 间DATE ection Edit 修改涂层系统和颜色、环氧涂料技术指标 Modified The Painting Systems And Color, As Well As Performance Of Epoxy Coating U03 部分修改 Section Edit 修改保温层下酚醛环氧类涂料的厚度 Modified the thickness of epoxy–phenolic coating under insulation 增加部分标准和规范名称 Added some standards and regulations U04 部分修改 Section Edit 修改涂层系统 Modified the coating system 待定 Holds 版次REV. 待定描述HOLD DESCRIPTION TABLE OF CONTENTS目录 1 DESIGN SCOPE 设计范围 1 2 STANDARDS AND REGULATIONS 采用的标准和规范 2 3 GENERAL 一般规定 3 4 HSE 4 5 PAINTING SYSTEM喷涂系统 5 6 SURFACE PREPARATION 表面预处理 8 7 COATING APPLICATION 喷涂施工 10 8 INSPECTION检验 20 9 SAFETY FOR TRANSIT安全运输 24 10 SUBMITTED PAPERS提交文件 25 1 DESIGN SCOPE 设计范围 This Specification specifies the minimum requirements on design, painting, inspection and testing of the coating for the steel equipment made in factory of this Project. This specification(U04 version) is suitable for DD2 or DD3 only .not suitable for DD1. The application scope of this document should include follows: 本设计规定了本工程工厂制造设备的外涂层在设计、施工，检测和测试方面的最低要求。本设计文件应用范围包括： he external painting of carbon steel equipment made in factory (shop). 所有工厂制造的碳钢设备的外防腐 he painting for external surface of stainless steel equipments need insulation 需要保温的不锈钢设备的防腐 he external painting of steel water tanks made in factory (shop). 工厂制造的钢制水罐的外壁防腐 surface coating is not within the scope of this d