iec61010_1j报告.doc

Test Report issued under the responsibility of: TEST REPORT IEC 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory usePart 1: General requirements Report Number. : Date of issue : Total number of pages : Applicant’s name : Address : Test specification: Standard : IEC 61010-1:2010 (Third Edition) Test procedure : CB Scheme Non-standard test method : Test Report Form No. : IEC61010_1J Test Report Form(s) Originator : VDE Testing and Certification Institute Master TRF : 2013-11 Copyright ? 2013 Worldwide System for Conformity Testing and Certification of Electrotechnical Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the readers interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. Test item description : Trade Mark : Manufacturer : Model/Type reference : Ratings : Testing procedure and testing location: CB Testing Laboratory: Testing location/ address :  Associated CB Laboratory: Testing location/ address :  Tested by (name + signature) : Approved by (name + signature) : Testing procedure: TMP Testing location/ address :  Tested by (name + signature) : Approved by (name + signature) : Testing procedure: WMT Testing location/ address :  Tested by (name + signature) : Witnessed by (name + signature) : Approved by (nam