如何将NAS加入AD资料.ppt

How to join NAS to Active Directory (AD server) . Steps Make sure what’s your AD server name and the domain name . Set DNS information . Join the AD server . Make sure what’s your AD server name and the domain name . In Active Directory Users and Computers . For this example , the AD server name is “.tw” , domain name is “VANCE” . Set DNS information . Login NAS as an Administrator . Go to Administration → System → Date/Time → Set Date/Time of the NAS , which must be same as the time of the AD server . Set DNS information . Go to Network → Network Setup → Setup → Check “Specify an IP address” → Set Primary DNS IP as the AD server IP . Join the AD server . Go to File Print → Protocol Control → Windows → Click “AD Domain” and Enter your AD server information to join it . Join the AD server . Then you can see the message showing that NAS has joined the AD domain successfully . Note about Windows 7 Please change the Network security setting of the client PC with Windows 7 Operating System in case the PC doesnt belong to an Active Directory, and NAS is an AD domain member at the same time . Please simply follow through the step-by-step guide below. Windows 7 in AD － Step 1 In Windows 7 , please login with administrator account . Go to Program → Accessories → Command Prompt , click right button of mouse and execute Run as administrator . Windows 7 in AD － Step 2 Type the “ secpol.msc ” . Windows 7 in AD － Step 3 Go to Security Setting → Local Policies → Security Options → Network Security: Lan Manager authentication level . Windows 7 in AD － Step 4 Choice “Send LM NTLMv2 – use NTLMv2 session security if negotiated” . Reboot your PC . * * * * * * * * * * * * * * * * * * * * * *