XD-200+T全电脑剥皮扭线机(双线).doc

XD-200+T全电脑裁线剥皮扭线机 XD-200+Tcomputerized wire cutting and twisting machine 特点说明characteristic descriptiom 最近电子产品，倾向轻，薄，短，小之要求，故所需电线也向细线、短线及高精度，本机正好能发挥其最大长处。以往被视为很难加工的 50mm 之内的短线，现在并无任何困难，甚至总长度仅有 1mm 时，两端亦可同时各剥皮 0.3mm 。同时可分别设定送线、进刀、退刀再脱皮及脱皮速度，对于隔离线亦可强制脱皮到 99mm ，排除了以往隔离线不能全剥皮及伤到心线之困扰。 一目了然，所设定之尺寸清楚地显示在液晶板上。各种线材粗细、尺寸，均由按钮设定。能够轻易的设定出所需加工线材的尺寸，即使有设定错误的情况发生时，电脑也能立刻警示，并指示在何设定错误，再进行修正即可。所需线材的数量也可设定总数、把数，并可清楚的显示出来。可二条线同时加工。短线、细线、超高精密度裁线功能；可同时加工二条电线，产量大幅提高。二条线同时切断，同时剥皮为最先进机种，同时亦可只做一条。对于裁剪样本及大量生产时均可应付自如，经济效益非常高。 FEATURES The electronic products currently incline to light, thin, short and small requirement, so the wire required shall be thin,short and with high precision. This machine can exert its outstanding advantage. The Short wire less than 50mm is hard to processing in the past, but now it is very easy, even the length is only 1mm, it can peel 0.3mm respectively in each side. in addition, it can set wire feeding, knife entering, knife exiting and peeling, peeling speed, for separation wire, it can be forced to peel 99mm,removing the difficulty in the past that the separation wire cannot de fully peeled and the core is hurt. The setting size is clearly shown in the liquid crystal panel, and the sizes of various wire materials are set with buttons; it can easily set the size of wire material to be processed, even a wrong setting can be warned immediately in the computer, and the computer will indicate where the wrong setting locates, the operator may correct it, The quantity of wire materials can also be set in total amount, number of bundles; it can process two wires at the same; with the cutting function of short wire, thin wire and super-precision wire; it can process two wires at the same time, so the output has a large improvement, two wires can be cut, peeled in the most advanced machine at the same time. Lt can handle various production situations and realize high economic benefit. 特点说明characteristic descriptiom 针对电子线、矽胶线、铁弗龙线、玻璃织维线、隔离线、套管等、全自动 剪裁、剥皮、半剥、中间剥皮、扭线特殊功能；可