profinet check problem.pptx

Profinet check test question Device firmware need update device firmware stutas erro 1.1 all SICK-S3000 ‘s firmware need to update All SICK –S3000 now the firmware is all V1.11.0.0, but it request to updated to V1.12.0.0 . I check also in Kuka Z3, also V1.11.0.0 . Maybe all is V1.11.0.0 before, And I ask Sick , they say they also do not know about this , all SICK –S3000 should send back their company and use the machine update. V1.11.0.0 seem has no problem, I suggest that don’t update the firmware of SICK-S3000. SOP is start . 1.2 all Euchner MGB ‘s firmware need to update Euchner MGB firmware is V3.24.0.1 is higher than requesting V3.23.1 1.3 all Pepperl+Fuchsldent firmware need to update Pepperl+Fuchslden firmware is V3.2.0.1 is higher than requesting V3.1 1.4 all PNIO-Stack3.6/Win32 ISRA_MRA_KN firmware need to update The ISRA controller we has no idea how to update the firmware . But I think now the firmware is enough . 1.5 all S7-PC controller for isomrak firmware need to update The Isomark controller we has no idea how to update the firmware . But I think now the firmware is enough . 2.1 all SCALANCE X-200 has a erro that Configuration deviation Mr li jiangtao say he will send us a document that how to fix this . 2.2 all Pepperl+Fuchsldent has a erro that Configuration deviation In the hardware configration, there is no erro for Pepperl+Fuchs ldent ,so I has no idea about this , should you confirm this ? 2.3 some device has PN Error Some device when testing its profinet , if somebody open the satation ‘s safety-door, Festo module and MVK moudule will lose the 24V for output , I different to stop somebody to open safety-door when testing report . So I think this is not a problem .