▲▲MTTY刷机指令命令(修复砖头用)大全-最详细的指令介绍.doc

MTTY 命令，详细参考下面英文内容：本指令适用于刷机成砖头的，一般正常的就免试了，只作为一种修复方法task 28 命令，此命令能修复一部分刷机失败，死机再启动画面的机器,此命令可以代替硬启按键。task 28 55aa 命令，此命令能修复一部分刷机USB升级后ROM的文件储存方式。（刷机写入不成功的，首先可试一下这个指令）format BINFS 升级降级OS版本必须命令，在2003和wm5之间互刷必须先执行此命令，此命令是格式化doc芯片，此法也同样能修复一部分刷坏的机器。info 8 察看flash检查返回结果，如果有坏块，里面会有提示info 2 检测机器CID号task 32检测机器CID号task 2a 命令修复坏块另附：info 3info 7info 4doctest 格式化，只保留IPL SPL。（一般不用）下面是mtty大部分spl命令（你的机子不一定全部命令都能用，因为智能机子的cpu分TI的和intel的等等，机情不同）以及命令参数形式和命令执行后的部分样本Bootloader commands:Some of this info has been taken from the help available in older HTC Devices and may not be the same in the Hermes Bootloader; see the Hermes specific notes below each command.第一个：setUsage:set [Type [Value]]Set control flags.Type(hex) : Control function types.Value(hex) : Setting values for types.If value is not given, default is 0.Type 0(Echo on/off): 1(on) and 0(off).cEchoFlag: Wether to echo all input. 1 to show what you type, 0 to stay quietType 1(Operation mode): 1(auto) and 0(user).cOpModeFlag: Set to 0 for friendly return values, 1 for easy-to-parse return values (0 for users, 1 for programs)Type 2(Back color on/off): 1(on) and 0(off).cBackColorShowFlag: Wether to draw a background with text.Type 3(Inverse on/off): 1(on) and 0(off).cShowInverseFlag: Wether to inverse fore and background colors (1 = yes, 0 = no)Type 4(Front color value): 16 bits datag_wFColor: Foreground color, 16-bit number, 5-6-5 bit compressionType 5(Background color value): 16 bits datag_wBColor:? Background color, 16-bit number, 5-6-5 bit compressionType 6(Set color of screen): Fill color to whole screen one time.Type 8(COMM queue flag): 0(TX_RX disable),1(RX enable),2(TX enable) and 3(TX_RX enable).g_cCommQueueFlag: UnknownType 14(action after reset): What to do after a reset. Set to 1 to go to bootloader after reset, set to 0 to start OS.Type 16(RUU Flag): setting it to 0 if your machine starts in bootloader mode may help to solve this problem.Type 1E(RUU command read/write fl