and Metal Soffits and Fascia.doc

Section Cover Page Section 07?46?33 Vinyl Siding and 2008-05-01 Metal Soffits and Fascia Use this Section to specify requirements for rigid vinyl (PVC) plastic siding and prefinished metal soffits and fascia. This Master Specification Section contains: .1 This Cover Page .2 Data Sheet - Reference Documents .3 Specification Section Text: 1. General 1.1 Related Sections 1.2 Submittals 1.3 Reference Documents 2. Products 2.1 Vinyl Siding 2.2 Metal Soffits 2.3 Metal Fascia 2.4 Accessories 3. Execution 3.1 Verification of Conditions 3.2 Sheathing Paper Installation 2.3 Installation, Generally 3.4 Siding Schedule Applicable Standards: .1 CAN/CGSB-41.2495 Rigid Vinyl Siding, Soffits and Fascia .2 CAN/CGSB-41.33-M87 Installation of Rigid Vinyl Residential Siding, Soffits and Fascia .3 CAN/CGSB 51.32-M77 Sheathing, Membrane, Breather Type .4 CAN/CGSB-93.2-M91 Prefinished Aluminum Siding, Soffits and Fascia, for Residential Use .5 CAN/CGSB-93.4-92 Galvanized and Aluminum-Zinc Alloy Coated Steel Siding, Soffits and Fascia, Prefinished Residential .6 CAN/CGSB-93.5-92 Installation of Metal Residential Siding, Soffits and Fascia .7 CSA B111-1974 Wire Nails, Spikes and Staples END OF DATA SHEET 1. General 1.1 RELATED SECTIONS SPEC NOTE: Edit or delete this article to suit project requirements. .1 Sheet Metal Roof Flashings: Section 07?62?00. .2 Window flashings: Section 08[?????????]. .3 Door Flashings: Section 08[?????????]. 1.2 SUBMITTALS .1 Comply with requirements of Division 01. .2 Provide product data indicating dimensions, profiles, attachment methods, trim, and related work. .3 Provide duplicate samples representative of materials, finishes, colours and profiles. .4 Provide data indicating vented soffit free opening area. 1.3 REFERENCE DOCUMENTS .1 Meet or exceed requirements of the following: .1 CAN/CGSB41.2495, Rigid Vinyl Siding, Soffits and Fascia. .2 CAN/CGSB-41.33-M87, Installation of Rigid Viny