局域网及计算机网络配置.ppt

provision err 0 discriptor err, 0 pci err, 0 transmit fifo unerflow 0 backup SR1 0xc1 SR2 0x77 SR3 0x1f SR4 0x7f TFQ RP 0x81 WP 0x80 Err_interrupt 0 rmblk_err 0 tpq 座机电话号码 tdq 座机电话号码 tfq 座机电话号码 Tx Count: -300708 -300708 -300708 0 TxDesPtr_Err 0 RxDesPtr_Err 0 TxPqFull 0 Async0/0 is down, line protocol is down Hardware is Aux PC16x50 Mode Async Speed 9600 DTR UP,DSR DOWN,RTS UP,CTS DOWN,DCD DOWN MTU 1500 bytes, BW 9 kbit, DLY 10000 usec Encapsulation PPP, loopback not set Keepalive set 10 sec LCP Listening -- waiting for remote host to attempt open IPCP Listening -- waiting for remote host to attempt open local IP address: 0.0.0.0 remote IP address: 0.0.0.0 60 second input rate 0 bits/sec, 0 packets/sec! 60 second output rate 0 bits/sec, 0 packets/sec! pc16x50 UART 0, 4074 Interrupt 0 packets input, 0 bytes, 0 no buffer 0 input errors, 0 rx_dump, 0 Parity, 0 frame, 0 overrun 0 packets output, 0 bytes, 0 underruns aux 0 output queue full, 0 frame has mblk more than one, 0 lstat timeout flow control mode: hardware Loopback0 is up, line protocol is up Hardware is Loopback MTU 1514 bytes, BW 座机电话号码 kbit, DLY 500 usec Interface address is 192.168.253.3/32 Encapsulation LOOPBACK Tunnel100 is up, line protocol is up Hardware is Tunnel MTU 1476 bytes, BW 9 kbit, DLY 50000 usec Interface address is 192.168.0.33/30 Encapsulation TUNNEL, loopback not set Keepalive period:0/5 s, retry:0/5 TUNNEL source 218.22.58.34, destination 218.22.3.209 TUNNEL protocol/transport GRE/IP, key disabled, sequencing disabled Checksumming of packets disabled, fast tunneling enabled 60 second input rate 264 bits/sec, 0 packets/sec! 60 second output rate 184 bits/sec, 0 packets/sec! 948798 packets input, 101652740 bytes input, 0 error, 0 discard 877192 packets output, 座机电话号码 bytes output, 0 discard Tunnel101 is up, line protocol is up Hardware is Tunnel MTU 1476 bytes, BW 9 kbit, DLY 50000 usec Interface address is 192.168.0.41