Comptus辐射计.docVIP

辐射传感器 Model A70-I Pyranometer with Transmitter S60 硅辐射传感器 导轨式发射器 The LI200SB Silicon Pyranometer measures both direct and diffuse insolation. The pyranometer output responds to the cosine of the angle between the sensor and the light source. LI200SB The signal from the sensor is scaled by the signal conditioner to provide the desired output. The system should only be used to monitor natural sunlight. Contact the factory regarding other light sources. The A70 Series provides an analog signal output proportional to the phenomenon being monitored at an economical cost. All components have proven themselves rugged and reliable throughout many years of field operation. These units are used in conjunction with electronic data collection systems or for input to control systems. They are readily combined with meter relays to provide custom controls. 硅辐射传感器能同时测量直接辐射与散射辐射，日摄强度计根据传感器和光源角度余弦变化输出信号。传感器的信号被数据调制器调制后得到需要的输出数据。此系统仅用于监测自然光源。如果需要监测其他光源，请与工厂联系。A70系列设备以低廉的成本监测光辐射，并得到相应的模拟信号输出。经过多年试验证明，所有部件均牢固可靠。 这些模块可用于和电子数据采集系统集成，或提供给控制系统的输入All systems are available with outputs of 0-1 mA, 0-1 V or 4-20 mA. All systems may be powered from either 120 VAC, 230 VAC or 12 - 24 VDC. The instruments are available in a variety of packages including steel JIC boxes meeting NEMA 12 standards, weatherproof fiberglass enclosures meeting NEMA 4X, IP66 and IEC 529 standards and track mounted versions. NEMA 12 enclosures provide protection from dust for indoor applications. NEMA 4X enclosures may be used indoors or outdoors. They provide protection from corrosion, wind blown dust and rain and are undamaged by ice. Track mounted versions are intended for mounting inside an enclosure provided by the user. Where required, electrical connection to the sensor is via terminal block. A barrier strip is provided for connection to operating power. 系统输出为0-1 mA、 0-1 V、0-5V 或 4-20 mA，需要的电源输入为120 VAC、230 VAC、24 VAC、12 - 24 VDC。 此仪器可用各式材料包装，如满足NEMA 12 规格的钢制JIC刚套