G-MO-005(J)ZIPPER5MOLDCLEANING清洗铸模a1.docVIP

To be filled by QS To be filled by Originator Approval: Name / Sign Podium ZMO,TG,PF Review Cycle 1Year WI Originator Lu Ming Training Required: Engineering Lim Alex YES NO Manufacturing Lee Soon Wooi If No, specify reason: ________________________________________ ________________________________________ ________________________________________ WI Owner Fu Xiang QS Manager Chan Woon Chun Customer N/A Recording Title Rev Format # Retention period Responsible By Remarks Valid date Distribution Extract Pages No of copies Distribution Area HISTORY Implementation Date Rev Previous Originator Description Of Change 05/04/2006 0 Zhao Peng Convert from :V-MO-0007/ rev 0 and V-MO-0012/ rev 1 08/12/2006 1 Chen Ya Wei a Change originator from Zhao Peng to Chen Ya Wei b Change detector cleaning frequency from 2/weekly to 1/weekly at page 2 c Remove mold cleaning process d Add in mold clean process drawing and mold cleaning order at page 2 e Remove the item 6 and 7 of the compression cleaning procedure. f Change “must apply mold release “to “Spray mold release less than 10 second when do dummy frame” at page14 HISTORY Implementation Date Rev Previous Originator Description Of Change 08/06/2007 2 Xu Bin 1.Change originator to Xu Bin. 2.Change WI format Rev from C to D. 3 Lu Ming Divide mol d cleaning procedure into EMITTER part and DETECTOR part 一.MOLD CLEANING PROCEDURE 铸模清洗程序 EMITTER MACHINE 对于EMITTER机器 DETECTOR MACHINE 对于DETECTOR机器 二. COMPRESSION CLEANING PROCEDURE 清洗压缩器程序 PURPOSE 目的 To define the process of compression cleaning. 设定清洗压缩器程序 。 RESPONSIBILITIES 负责人 Production operator is to perform this operation 生产操作员必须进行此程序。 EQUIPMENT/ MATERIALS 仪器 / 材料 Melamine 2. Mold Release THE PROCEDURE 程序 1. Set the control panel, turn to MAN, cleaning OFF. Do not change the program #. 设定控制仪板，转移至 MAN，清洗则是 “OFF ” 。不可更换程序 # 。 2. Spray properly mold release on the top and bottom chase. 喷适当的铸模释放剂喷射在雕镂上下方 。 3. Upload the plunger and spray the mold release on