（HSE管理文件）FREP-04-HSE-2011.doc

福建联合石化公司项目ROJECT CONSTRUCTION 手动工具程序 HAND TOOLS PROCEDURE 文件编号DOCUMENT NUMBER: FREP-04--2011  手动工具程序 HAND TOOLS PROCEDURE 目 录 TABLE OF CONTENTS 编号No. 页码Page 1.0 目的PURPOSE 3 2.0 范围SCOPE 3 3.0 定义DEFINITIONS 3 4.0 职责RESPONSIBILITIES 3 5.0 指导INSTRUCTIONS 3 6.0 参考资料REFERENCES 6 7.0 附件ATTACHMENTS 6 目的Purpose 1.1本程序为安全使用手动工具提出了起码要求。 This Procedure provides the minimum requirements for the safe use of hand tools. 范围Scope 2.1本程序适用于项目中手动工具的安全使用。 This procedure is applicable for the safe use of hand tools in FREP project. 定义Definitions 3.1无None 职责Responsibilities 4.1受控承包商的惯用做法至少要满足或超过第5节和附件所规定的要求，受控承包商应根据要求对工作进行管理和监督。 MANAGED CONTRACTOR’s practices as a minimum shall meet or exceed the requirements specified in Section 5 and Attachments, and MANAGED CONTRACTOR shall manage and supervise the work in accordance with the requirements. 4.2业主和业主代表人员将根据第5节和附件所规定的要求对受控承包商的符合性进行监督、检查和审核，业主和业主代表有权要求受控承包商按照缺陷通知书进行整改。 MANAGED CONTRACTOR’s conformance with the requirements specified in Section 5 and Attachments shall be subject to monitor, inspection and audit by Owner or Owner’s Representative, and Owner or Owner’s Representative shall have the right to require MANAGED CONTRACTOR to correct any def