（HSE管理文件）FREP-04-HSE-2015.doc

福建项目ROJECT CONSTRUCTION 危险能量控制（锁定/贴标签）程序 CONTROL OF HAZARDOUS ENERGY (LOCKOUT/TAGOUT)PROCEDURE 文件编号DOCUMENT NUMBER: FREP-04--2015  危险能量控制（锁定/贴标签）程序 CONTROL OF HAZARDOUS ENERGY （LOCKOUT/TAGOUT）PROCEDURE 目录Table of Contents 编号NO. 页码page 1.0 目的PURPOSE 3 2.0 范围SCOPE 3 3.0 定义DEFINITIONS 3 4.0 职责RESPONSIBILITIES 3 5.0 指导说明INSTRUCTIONS 4 6.0 参考资料REFERENCES 12 7.0 附件ATTACHMENTS 12 1.0目的PURPOSE This Procedure establishes the minimum requirements for the control of hazardous energy sources. 2.0 范围SCOPE the control of hazardous energy sources in FREP project. 3.0 定义 DEFINITION Caution Tag 本标签是用来告知员工关于安全和正确操作设备的特殊预防措施或指导说明。本标签不可用来防止 运行设备和系统的。 This tag is used to inform personnel of special precautions or instructions about safe and proper operation of equipment. This tag is not to be used to prevent equipment and systems from being operated. 3.2 危险标签Danger Tag 3.2.1 本标签粘贴在开关、断路器和其他电控装置上以警告其他人该设备和/或系统已经与电源隔离（断开电源的）且员工正在该设备或系统上进行操作。 This tag is attached to a switch, circuit breaker, and other electrical controlling devices to warn others that the equipment and/or system has been isolated from its power source (de-energized) and that employees are working on the equipment or system. 3.2.2 本标签粘贴在阀杆、适当的断路器、开关和其他操作机构上以防止在处理过程中操作或运行机械设备和加压系统。也可以使用本标签对系统的操作部分和非操作