（HSE管理文件）FREP-04-HSE-2021.001.doc

附件 A ATTACHMENT A 吊装与吊装计划 RIGGING AND LIFT PLAN 地点Location:________________________________________________________________ 吊装日期：Date of Lift: ____ __ 载物介绍： Load Description:________________________________________________________________________________________ 吊装中是否包括人员输送？ Does this lift involve the lifting of personnel 是Yes 否 No 如果是，6404-22.000人-If Yes, 6404-22.000 - Personnel Hoisting 吊装 介绍 Lift description:________________________________________________________________________________________ A. 重量WEIGHT B. 起重臂 JIB 设备重量Weight of Equipment __________lb. 安装Erected 装载Stowed 撞球重量Weight of Headache Ball __________lb. 1. 起重臂长度Length of Jib _____________ 载轮重量Weight of Load Block __________lb. 2. 起重臂角度Angle of Jib _____________ 吊装杆重量Weight of Lifting Bar __________lb. 3. 起重臂额定载荷能力（见图表）Rated Capacity of Jib From Chart 吊索和吊钩重量 Weight of Slings Shackles __________lb. 吊索/吊钩的尺寸 SIZING OF SLINGS/SHACKLES 起重臂重量Weight of Jib __________lb. 1. 吊索的选择Sling Selection 缆索重量（吊装末端） Weight of cable Load Fall __________lb. a. 装置类型Type of Arrangement _____________ 设备中未做说明的材料（重量为设备的10%） Allowance for Unaccounted Material in Equipment 10% of Equip. Weight . __________lb 装配图上的吊索编号 Number of Slings in Hookup _____________ 吊装人员的数量x 250磅 No. of People Lifted x 250 lb. __________lb. c. 吊索长度Sling Length _____________ 其它Other __________________________ __________lb. 吊索额定载荷能力 Rated Capacity of Slings _____________ 总重量 TOTAL WEIGHT 2. 吊钩的选择Shackle Selection 载荷重量来源 Source of Load Weight:__________________________________ _ 名称，图纸，计划 （Name Plate, Drawings, Calculated a. 载重量（吨）Capacity tons 连接于载荷的吊钩 Shackles Attached to Load By: _____________ _____________ 重量检验人： Weight Verified By:_________________________________ ___ b. 吊钩编号Number of Shackles _____________ D.起重机D. CRANE E. 起重机布置CRANE PLACEMENT 起重机类型Type of Crane ____________________________________ 1. 安装区域地基是否平坦、坚固Smooth Solid Foundation in Area? 是Yes 否No 起重机容量Crane Capacity _________