B危险源安全防措施和监控措施.doc

B级危险源（点）安全防范措施 1、车间主任认真学习落实“危险源（点）管理、辨识与定期评估制度”，宣传贯彻《安全生产法》、《消防法》，和上级政府部门、公司下发的关于安全、消防方面的规章制度、通知、办法等文件。 2、凡进入B级危险源（点）的人员必须进行防火、防爆、防毒、防触电教育，禁止任何人携带易燃易爆物品。 3、B级危险源（点）岗位职工必须经过三级安全教育和消防安全岗前教育，考试合格后方可上岗，特种作业人员必须经过政府部门培训持证上岗。 4、严格落实安全、消防检查制度。检查内容：查班长或组长、查思想、查制度、查隐患、查监控及防范措施是否掌握和落实。 5、全面查找安全事故隐患和火灾事故隐患。查安全、消防设施的薄弱环节，对发现的事故隐患彻底整改和重点治理，对限期不能整改的隐患，要求定隐患性质、定整改方案、定整改负责人、定整改时间、定可能发生事故的防范措施和监控措施、定安全防范措施负责人、监控措施负责人和24小时监控人员，始终做到警钟长鸣。 6、车间主任逐级落实安全和防火责任制，落实安全、消防设施和安全、消防器材的配备、维护。做到数量达标、质量合格、布局合理。 7、加强用火、用电、用气管理，作业时必须严格落实动火票和相关作业票。 8、易燃易爆危险物品必须存放在制定地点。严禁在B级危险源乱放。 9、电器线路改装必须经过安全、消防和机动部门审批，电器线路、设备维修安装应由持证电工负责，作业时严格执行消防安全操作规程， 严禁随意拉设电线，严禁超负荷用电。 10、易燃易爆场所必须使用防爆电机、防火线缆和防爆电器，禁止私用电热棒、电炉等大功率电器。 11、进入煤气区作业必须佩戴空气呼吸器，必须2人以上并有专职安全煤防员现场监护。 12、 regulations are strictly implemented, work style and work style of cadres to further change, the party do The group further close relation, further establish the safety supervision cadres for the people, pragmatic and honest good image. The long-term goal: rectification with good work style, solid work measures, carry out supervision and administration of production safety work, ensure the production safety situation continues steady improvement, to achieve a fundamental improvement goal, to provide safe production platform for security the countys economic and social development. (two) the specific path: rectification can be generally divided into three stages: 1, carry out the look back, make improvement plan stage (before August 30, 2014). The main tasks are: in accordance with the six requirement, earnestly back board leadership See work, timely leak turnover, and lay a solid foundation of the implementation of the rectification; Party members take the lead in developing the look back , further modify personal control.Check material, focus on revealing problems more thick, more profound thoughts touched some corrective measures to some more efforts, and to participate as an ordinary party where the branch will be the topic of organizationa