工程机械制造 国企业简介.doc

《中国工程机械》杂志正式发布 2011年全球工程机械制造商50强排行榜 以下是入选全球工程机械制造商50强排行榜的中国企业 排名 公司名称 公司英文名称 国别 7 徐工集团 XCMG 中国 8 中联重科 Zoomlion Heavy Industry 中国 9 三一集团 Sany Group 中国 18 柳工机械 Liugong Machinery Co.,Ltd. 中国 22 龙工 Lonking Holdings Ltd. 中国 24 山推股份 Shantui Construction Machinery Co., Ltd. 中国 26 厦工机械 Xiamen XGMA Machinery Co., Ltd. 中国 41 福田雷沃重工 Foton Lovol international heavy industries Co.,Ltd. 中国 42 国机集团 China National Machinery Industry Corporation 中国 43 玉柴重工 Yuchai Heavy Industries Co., Ltd. 中国 46 山河智能 Hunan Sunward Intelligent Machinery Co.,Ltd. 中国 of support and hanger. Cable hole plugging gaps should use qualified fireproof materials, block surface should have sufficient strength, surface appearance. When cables pass through the firewall, of lax structure of local fire safety clamps. Thermoplastics production, to comply with the process, no bubbles in the thermoplastics pipes, linear nose consistent with the core wire specifications, contact is good, no cracks, break. Tinned copper nose clean solder full exterior surface is smooth without burrs. Control cable Assembly should be fastened, dense, solid, clean, and beautiful. Secondary wiring the cable terminations should be arranged by the actual location of the device line cards, the wiring from the upper to the lower, from left to right in the order. Fixed to maintain consistent spacing between lines, flat, should be around the corner in the same location, same shape, to ensure that the wiring process neater and more elegant. 5 thermal process control measures for quality problems 5.1 control thermal duct system leakage measure to ensure that the use of electric door and actuator installation quality and equipment to the site to check its seal, acceptance, in order to fundamentally solve oil spill problems. Plant for local Panel after installation, in conjunction with the quality Department to check its overall quality, poor-quality parts replacement. Supply good quality of purchasing instrument and ovality of th