工行网银授权操说明.doc

资金监管系统工行网银指令授权说明 1、登陆工行网上银行。/icbc/ 2、点击【企业网上银行登陆】，如图： 3在新打开的页面中，点击【企业网上银行登陆】，如图： 4、选择使用的证书，点击确定。如图： 5、输入密码，如图。 6、点击指令查询与处理，如图。 7、点击左边的【待处理指令】，然后选择日期范围，点击确定。 8、查找需要处理的申请，点击前面的交易序号。如图： 9、点击序号前面的复选框，选中交易，进行批准或拒绝。 10、输入密码，如图。 11、输入密码确定后，需要按u盾上的OK键，需要两次。下图为批准以后的显示界面。 12、交易完成的显示界面。如下图： 二、 1、登陆进去后，点击付款业务，也可以通过【批准指令】——【批量支付】进行查询提交的指令。在渠道下拉框选择【银企互联】，选择日期范围，进行查询。然后点击批次号，进行批复。 2、选准序号前面的复选框，进行批准或拒绝。如图： 3、下图是拒绝后的界面。 of support and hanger. Cable hole plugging gaps should use qualified fireproof materials, block surface should have sufficient strength, surface appearance. When cables pass through the firewall, of lax structure of local fire safety clamps. Thermoplastics production, to comply with the process, no bubbles in the thermoplastics pipes, linear nose consistent with the core wire specifications, contact is good, no cracks, break. Tinned copper nose clean solder full exterior surface is smooth without burrs. Control cable Assembly should be fastened, dense, solid, clean, and beautiful. Secondary wiring the cable terminations should be arranged by the actual location of the device line cards, the wiring from the upper to the lower, from left to right in the order. Fixed to maintain consistent spacing between lines, flat, should be around the corner in the same location, same shape, to ensure that the wiring process neater and more elegant. 5 thermal process control measures for quality problems 5.1 control thermal duct system leakage measure to ensure that the use of electric door and actuator installation quality and equipment to the site to check its seal, acceptance, in order to fundamentally solve oil spill problems. Plant for local Panel after installation, in conjunction with the quality Department to check its overall quality, poor-quality parts replacement. Supply good quality of purchasing instrument and ovality of the guarantee instrument tubes as small as possible, selection of high quality, high precision sleeve connector. Instrument pipe welding, construction