建筑施工现场安图集.doc

现场安全文明施工标准图集 南通建工集团股份有限公司 目 录 木工棚、钢筋棚做法示意图 13、电梯井防护图 合灰机、搅拌机防护棚做法示意图 14、脚手架搭设安全色踢脚板做法 安全通道示意图（多层24m以下） 15、脚手架内平网设置 安全通道示意图（高层24m以上） 16、脚手架外排阳角处做法示意图 配电箱防雨棚做法示意图Ⅰ 17、型钢悬挑双斜支撑系统示意图 配电箱防雨棚做法示意图Ⅱ 18、落地式接料平台 总分箱护栏及地面硬化图 19、悬挑式钢平台 总分箱护栏及硬化地面尺寸图 20、接料平台防护门正立面图 楼梯、楼层和阳台临边防护示意图 21、接料平台防护门侧面图 屋面和楼层临边防护图 22、接料平台平面图 基坑周边防护栏杆示意图 23、限重牌示意图 洞口防护图 24、轮子锯钢丝网防护板示意图 of support and hanger. Cable hole plugging gaps should use qualified fireproof materials, block surface should have sufficient strength, surface appearance. When cables pass through the firewall, of lax structure of local fire safety clamps. Thermoplastics production, to comply with the process, no bubbles in the thermoplastics pipes, linear nose consistent with the core wire specifications, contact is good, no cracks, break. Tinned copper nose clean solder full exterior surface is smooth without burrs. Control cable Assembly should be fastened, dense, solid, clean, and beautiful. Secondary wiring the cable terminations should be arranged by the actual location of the device line cards, the wiring from the upper to the lower, from left to right in the order. Fixed to maintain consistent spacing between lines, flat, should be around the corner in the same location, same shape, to ensure that the wiring process neater and more elegant. 5 thermal process control measures for quality problems 5.1 control thermal duct system leakage measure to ensure that the use of electric door and actuator installation quality and equipment to the site to check its seal, acceptance, in order to fundamentally solve oil spill problems. Plant for local Panel after installation, in conjunction with the quality Department to check its