Linux网络务器配置与管理—实训方案.doc

12级 Linux服务器配置与管理 实训方案 一、实训内容 项目1、DHCP服务的安装配置与管理 项目2、DNS服务的安装配置与管理 项目3、LAMP服务的安装配置与管理 项目4、LNMP服务的安装配置与管理 项目5、VSFTP服务的安装配置与管理 项目6、NFS服务的安装配置与管理 项目7、SAMBA服务的安装配置与管理 项目8、SQUID代理服务的安装与配置 项目9、电子邮件系统的安装与配置 项目10、vpn的安装与配置 二、格式要求 项目名称 项目目标 项目准备 项目实施 项目测试 问题分析及总结 格式见附件 同时电子版发到邮箱guzhihua@159.cn 文件名命名：学号+姓名 邮箱标题：学号+姓名_LINUX实训 the drawings, first to become familiar with the drawings, mainly about the following aspects: 1) pages of drawings and diagrams, maps; 2) a comprehensive understanding of drawing; 3) finding of design-driven dimensions (), do not resize and adjust the size; 4) questioned the drawings; 5) develop buries a construction programme and technical clarification; 6) clear corners and special treatment; 7) controlled construction drawings to verify construction scheme and design. (2) at the construction site to find subject planted area: various engineering, first on the scene to find planted area, it must first understand the curtain wall installation section, and some projects are all curtain wall, the entire project is a region-wide, only partial walls, the zone is local. (3) identify the axis positioning: positioning the drawings shown in axis compared with the actual construction site to find out exactly where the axis positioning, axis positioning function are: 1) to help determine the origin of curtain walls; 2) acceptance of the installation is accurate; 3) adjust errors, and determine the error range. (4) find anchor points: according to site to find the exact location of the axis, according to the drawings provided by the content determine the positioning point; number of anchor points shall not be less than two points. Repeated measurements determine the location points must ensure that the positioning is correct. (5) take level (level): level (minor works available in horizontal pipe), the two anchor points determine the horizontal position. Level according to use the drawings, first to become familiar with the drawi