Lomo风格照效果.doc

Lomo风格照片效果-PS非主流艺术照片处理教程 来源 中国教程网 发布时间 2009-08-24 LOMO风格照片特点：暗角；色彩浓郁；随意。 什么是LOMO风格照片？ lomo原指前苏联一款由于技术局限而导致曝光不足的有缺陷的相机。然而现在因其异常鲜艳的色彩和暗角往往给拍摄者出乎意料的惊喜。lomo风格用夸张艳丽的色彩，扭曲的空间，暗角，模糊，隧道感带给人视觉上的冲击，表现与众不同的世界。它是种更加恣意，纯粹，主观的拍摄方式。 Lomo风格色彩强烈、不用闪光灯，在灯光越暗的情况下照出来效果越好。它还有一种特殊的“隧道效果”（即暗角）：照片的四周会显得比中间暗很多。以及随性而显得眩晕的效果。 有专门的lomo相机，能拍出lomo效果。也可以用图像处理软件后期加工，形成lomo效果。 下面是一个LOMO风格照片的处理教程： 原照片 LOMO风格效果图 Lomo风格照片效果-PS非主流艺术照片处理教程 1.打开原图,执行图象/调整/亮度对比度,增加对比度,再执行色相/饱和度,增加饱和度。 2.然后按Ctrl+A全选,再执行选择/修改/扩边,再执行羽化(参数如图),然后新建一层填充黑色,并把混合模式设为叠加. 3.把图层一复制一层,使暗角更明显.然后再新建一层,按住Ctrl点击图层一载入选区,按Ctrl+Shift+I反选,然后填充白色,并把混合模式设为叠加,不透明度设为30%。 最终效果图 the drawings, first to become familiar with the drawings, mainly about the following aspects: 1) pages of drawings and diagrams, maps; 2) a comprehensive understanding of drawing; 3) finding of design-driven dimensions (), do not resize and adjust the size; 4) questioned the drawings; 5) develop buries a construction programme and technical clarification; 6) clear corners and special treatment; 7) controlled construction drawings to verify construction scheme and design. (2) at the construction site to find subject planted area: various engineering, first on the scene to find planted area, it must first understand the curtain wall installation section, and some projects are all curtain wall, the entire project is a region-wide, only partial walls, the zone is local. (3) identify the axis positioning: positioning the drawings shown in axis compared with the actual construction site to find out exactly where the axis positioning, axis positioning function are: 1) to help determine the origin of curtain walls; 2) acceptance of the installation is accurate; 3) adjust errors, and determine the error range. (4) find anchor points: according to site to find the exact location of the axis, according to the drawings provided by the content determine the positioning point; number of anchor points shall not be less than two points. Repeated measurements deter