win7快速打命令行窗口的小技巧.doc

win7快速打开命令行窗口的小技巧在Windows 98/2000/XP/2003等系统中，都能在开始菜单在运行对话框中输入CMD打开命令行窗口，这是大家都知道的方法。而使用windows图标键加R键的组合打开运行对话框，然后在运行对话框中输入CMD就可以打开命令行窗口。在win7中已经没有运行这个链接了，于是大家只好使用WIN+R把运行对话框调出来。 请注意，此时使用的是当前登录的用户。 可是win7还有一个小技巧，那就是在任何地方，只要你按住shift键，然后点击右键，即可在菜单中发现一个“在这里打开命令行窗口”的菜单项，很方便吧。更让人高兴的是，此窗口是管理员权限，而且还会智能切换到当前目录，省去了很多手工输入目录的麻烦。  the drawings, first to become familiar with the drawings, mainly about the following aspects: 1) pages of drawings and diagrams, maps; 2) a comprehensive understanding of drawing; 3) finding of design-driven dimensions (), do not resize and adjust the size; 4) questioned the drawings; 5) develop buries a construction programme and technical clarification; 6) clear corners and special treatment; 7) controlled construction drawings to verify construction scheme and design. (2) at the construction site to find subject planted area: various engineering, first on the scene to find planted area, it must first understand the curtain wall installation section, and some projects are all curtain wall, the entire project is a region-wide, only partial walls, the zone is local. (3) identify the axis positioning: positioning the drawings shown in axis compared with the actual construction site to find out exactly where the axis positioning, axis positioning function are: 1) to help determine the origin of curtain walls; 2) acceptance of the installation is accurate; 3) adjust errors, and determine the error range. (4) find anchor points: according to site to find the exact location of the axis, according to the drawings provided by the content determine the positioning point; number of anchor points shall not be less than two points. Repeated measurements determine the location points must ensure that the positioning is correct. (5) take level (level): level (minor works available in horizontal pipe), the two anchor points determine the horizontal position. Level according to use the drawings, first to become familiar with the drawings, mainly abou