加工装配合同 中英文.doc

加工装配合同 CONTRACT FOR PROCESSING ASSEMBLY 合同号：_______________ 签订日期：_____________ 　　签约地：_______________ 　　甲方（加工装配方）：_______________公司 　　地址：_________________________________ 　　电话：___________传真：____________电子邮箱：__________ 　　乙方（来料、来件方）：（境外）________有限公司 　　地址：_________________________________ 　　电话：___________传真：____________电子邮箱：__________ 　　Contract No: ________________ 　　Conclusion Date: ____________ 　　Conclusion Place: ___________ 　　Party A: __________ Company (Party of Processing or Assembling) 　　Legal Address: ________________________________ 　　Tel: _______________ Fax: ______________ E-mail: _______________ 　　Party B:___________ Ltd. (Party of Supplying Materials and Parts) 　　Legal Address: ________________________________ 　　Tel: _______________; Fax: ______________; E-mail: _______________ 　　 双方在遵守中华人民共和国法律、法规的前提下，本着本等互利的原则，就来料加工__________进行了充分协商，一致达成如下合同条款： 　　 Party A and Party B, according to the laws and policies of the Peoples Republic of China and the relevant regulations and the principles of equality and mutual benefit, have held discussions relating to the processing and assembling of (plastic toy products) and have reached agreement on the following contractual clauses: 　　 一、双方责任 　　 1. Responsibilities 　　 1．甲方责任： 　　 (1)Responsibilities of Party A 　　 （1）提供有上盖之厂房________平方米，无上盖场地________平方米，工厂管理人员________名，生产工人________名、开业后________月增至________名。在合同期内代乙方加工生产上述产品，加工成品后交回乙方复出。 　　 1) Party A shall provide factory space consisting of _____ square metres, field of _____ square metres without covering, _____ factory management person and _____ workers for the first phase. The number of workers shall be increased to _____ twelve months after operation. Within the Contract term, Party A shall process the products for party B which shall be re-exproted to _____. 　　 （2）提供现有水、电设备供加工生产之用，如需新安装水、电设施，其费用由乙方支付。 　　 2) The water supply and utility equipment required for processing shall be provided by Party A. If additional installati