10分流_集流阀（SUN插阀应用技术资料）.ppt

插式分流/集流閥 Flow Divider/Combiner Valve Options Flow Divider Cartridge Valves FS*D flow divider splits the inlet flow to two outlet 油口 at the designed ratio. Three dividing ratios available, 50:50, 40:60, and 33.3:66.7. Pressure drop at maximum rated flow 250 psi (17 bar). Typical accuracy from + 6.5% at minimum flow to + 2.5% at maximum flow. Accuracy varies with specific models. Flow Divider Cartridge Valves FS*D-X*N Flow Divider Cartridge ValvesFSDD-X*N Pressure Drop Flow Divider/Combiner Cartridge Valves FS*A flow divider/combiner divides the flow in one direction and combines the flow in the other direction. Typical accuracy from + 4.5% at minimum flow to +2.5% at maximum flow. Pressure drop at maximum flow of 350 psi (24 bar). Only available with 50:50 ratio. FS*S flow divider/combiner with a synchronizing feature divides the flow in one direction and combines in the other direction. When used to synchronize two cylinders it allows both of them to fully stroke. Performance is the same as the FS*A cartridge. Flow Divider/Combiner Cartridge Valves FSFA-XAN Flow Divider/Combiner Cartridge Valves FSFS-XAN Flow Divider/Combiner Cartridge ValvesFSB*-XAN, FSC*-XAN Pressure Drop High Capacity Flow Divider/Combiner FS*H flow divider/combiner with increased flow capacity and lower accuracy. Typical accuracy from + 6.5% at minimum flow to+ 4% at maximum flow. Pressure drop at maximum flow is 350 psi (24 bar). Flow capacity is approximately 20% more than the FS*A cartridge. Typical use is on transmission circuits. High Capacity Flow Divider/Combiner FSFH-XAN High Capacity Flow Divider/CombinerFS*A-XAN and FS*H-XAN Models Rigid Frame Lockup FS*S-XAN Synchronization FS*S-XAN Combining Flow with Rigid Frame Grapple Tong Circuit Competition “Oil Controls” * 021 Q计SUN集成块与加工 上海然海液压机械科技有限公司 Q * 上海然海液压机械科技有限公司 Q Cavity T-31A (1) FSBD-*** FSBA-*** FSBS-*** -------- T-31A (2) FSCD-*** FSCA-***