英标混凝土规范中文版.doc

英标混凝土规范中文版 篇一：建筑工程英标规范(混凝土)中英文 SECTION: 2 第2章 混凝土 PART 1 GENERAL 第1节 总则 1 DESCRIPTION 说明 All concrete work is governed by this Section. 所有混凝土工程受本章的管理。 Work Included: Provide all cast-in-place concrete, complete and in place, as required by the Work, specified herein on the drawings and specifications. 包括的工作：按照图纸上规定的工作和相关标准要求，完整而到位地提供所有现浇混凝。 RELATED WORK: 有关工作 1 General Requirements 一般要求 2 Material材料 3 Concrete Mix 混凝土配合比 4 Construction Requests 施工要求 1.1. GENERAL REQUIREMENTS:一般要求 1.1.1. Concrete shall be batched only with approved materials, approved mix designs, and at approved facilities. 只能使用批准的材料、批准的配合比设计和在批准的设施内对混凝土 进行配料。 1.1.2. The Contractor shall define the method of design of the mix, by reference to a recognised published design method. 承包商应通过参考认可的设计方法确定配合比设计。 1.1.3. Plant trials shall be carried out for each grade and type of concrete in the contract, 你 unless approved otherwise by the Engineer. 除非监理工程师另有批准，应对每种标号和 种类的混凝土进行工厂试验。 1.1.4. Aggregate proportions shall be based on measured and not assumed relative densities. 集料的比例应根据测量的而非假设的相对密度。 1.1.5. If requested by the Engineer, concrete mix designs which include an admixture shall be prepared and tested 如果监理工程师要求，应准备和检验含外加剂的混凝土配合比设 计。 1.1.6. Results of the trial mixes must demonstrate that the mix complies with the strength, workability and durability requirements of specification. 试验配合比的结果必须证明所采 用的配合比符合规范的强度、和易性和耐久性要求。 1.2. QUALITY ASSURANCE 质量保证 1.2.1. Reference Codes and Standards. Concrete work shall conform in general to the requirements of BS 8110 and BS 5328. 参考规范和标准混凝土工程一般应符合英国 BS8110和BS5328的要求。 1.2.2. The following codes and standards referenced herein but not dated shall be those of the latest edition on the date of the Purchase Order contract. 以下引用的但未标注日期的规 范和标准应当是定购合同之日的必威体育精装版版本的规范和标准。 1. BS 12 -Portland cement 硅酸盐水泥（英国标准） 2. BS 812 -Testing aggregates 检验集料 （英国标准） 3. BS 882 -Aggregates from natural sources for concrete 混凝土的天然集料（英国标准） 4.