NEWMM2UBPSpecrev1.doc

MINUTEMAN 2U Rackmount Battery Packs Specification Prepared by: Robert Calhoun Date: 08/04/05 Revision: 1 Prepared by: Robert Calhoun Date: 11/10/05 Revision: Final TABLE of CONTENTS 1.0 Product Overview 4 2.0 Functional Requirements 4 2.1 Specification Summary Chart 4 2.2 Operational Parameters 5 Input Voltage range 5 Rear Panel Dipswitch Functions 5 Frequency 5 Charger 5 Charger Voltage 5 Charger Current 5 Recharge Time 5 Battery System 5 Approved Batteries 5 LEDs 5 2.3 Environment 6 Temperature range 6 Humidity 6 Barometric Pressure 6 3.0 Electrical 6 AC Input Socket 6 Input Power Cord 6 AC Input Circuit Breaker 6 AC Output Socket 6 Output Power Cord 6 External Battery Cable 6 External Battery Connector 7 DC Output Circuit Breaker 7 4.0 Mechanical 7 Front panel 7 Rear Panel 7 Battery Compartment 7 Rack/Tower Convertible 7 Wall Mountable 7 5.0 Legal and Regulator Standards 8 EMI emissions and susceptibility 8 Acoustical Noise 8 Safety 8 UL Ratings 8 6.0 Other Requirements 8 Shipping 8 Battery replacement instruction labels 8 Package contents 8 7.0 Documentation 9 Manual 9 Supporting documents 9 8.0 Field Performance 9 Reliability 9 Serviceability 9 9.0 Product Cost 9 MM 2U Battery Packs Specification 1.0 Product Overview This Battery Pack product line is a Rack/Wall mountable/Tower, External Battery Pack to be used with their respective MM UPS models. All models will have an internal charger to independently charge the internal batteries. This product line will be capable of operating at 115VAC or 230VAC and 50Hz or 60Hz (auto sensing). All models will have the ability to daisy chain the AC input and the DC output to a maximum of ten battery packs per UPS. The BP1 Battery Pack has 6-12V7.2Ah batteries. The BP2 Battery Pack has 6-12V9Ah batteries. All units will be rack mountable from the front and the middle of the unit. All units will have the capabilities to be rack mounted in a four (4)-post